Workshop manuals ›
P, G, R and T series
Document
- ID
- 54
- Business key
- B
- Type
- 71
Variant filter
Actions specified in the standard maintenance form must be added.
1=A&1323=E&520=B
Activities 11
| ID | Heading | Component | MG | Filter |
|---|---|---|---|---|
| 435 | Ethanol maintenance 2 (E2) includes E1 false | 0 | — | |
| 436 | 40,000 km intervals false | — | — | |
| 419 | Check that the vehicle is not leaking fuel before running-in in the workshop. false | Fuel system | 03 |
1=A&1323=E&520=B!1=A&1323=F&520=B!1=B&1323=F&520=B
|
| 278 | Clean the engine before working on the fuel system. false | Engine | 01 |
1=A&1323=E&520=B!1=A&1323=F&520=B
|
| 421 | Open the bleed nipple on the fuel manifold and renew the fuel filter. false | Fuel system | 03 |
1=A&1323=E&520=B
|
| 422 | Recondition or renew the unit injectors. Note: Be careful when cleaning the contact surface of the copper washer on the cylinder head. There are two different versions. Option 1: Use a new flange screw with a hexagon head and tightening torque 20 Nm+75°. Option 2: Use a new Torx screw and tightening torque 20 Nm+90°. false | Fuel system | 03 |
1=A&1323=E&520=B
|
| 423 | Check and adjust valve clearance and unit injectors. Intake valve: 0.45 mm and exhaust valve: 0.70 mm. false | Ethanol engine | 01 |
1=A&1323=E&520=B
|
| 1693 | Perform maintenance of the centrifugal oil cleaner. false | Engine | 01 |
1=A&1323=E&520=B!1=A&1323=F&520=B!1=B&1323=E&520=B!1=B&1323=F&520=B
|
| 276 | Change the oil and renew the filter. Check for leakage. false | Engine | 01 |
1=A&1323=E&520=B
|
| 424 | Bleed the fuel system, start the engine and check for leaks. false | Fuel system | 03 |
1=A&1323=E&520=B
|
| 425 | Measure the supply pressure and check the overflow valve. The pressure should be 4.5-5.5 bar. false | Fuel system | 03 |
1=A&1323=E&520=B
|
Change history (sv-SE)
2022-03-11: Protokollets tidigare titel var "E2-underhåll av etanolmotor, DC9E 02". [bib] 2022-02-14: Lagt till "Nyckel"=B. [bib] 2021-08-24: Uppdatering av de tidigare punkterna om rengöring/byte av rotor till underhåll av centrifug och FPC-villkor. [bib] 2018-04-10: Avvecklat dublett, är nu den här som gäller för "byta olja och filter" när det är etanol som drivmedel. [bib] 2015-12-15: Ändrat tillsyn till underhåll i varianttexten. [bib] 2013-10-01: Delat upp E1 och E2 på separata protokoll. [bib]