S Scania Multi 📌 unpin — ▢ ×
Pin a chassis:
Home Vehicle Parts Information Workshop Diagnostics Search Back Forward Help
V
DTC › AUS4 AUS4 / 005F

Cooling Fan MalFunction

â–¶ How to fix

Restart the system and check if the DTC remains active. Perform cooling fan test. Inspect the connector and wire of the cooling fan to the infotainment system. Make sure the fan is not blocked. Note. Before replacing the infotainment system update to the latest available software.

What you'll see

No driver-visible symptom recorded.

System reaction

When the cooling fan fails, the system reacts differently depending on the ambient and system temperature. At system temperature below 80 ° C: No visible systemic reaction. At system temperature above 80 ° C: Varying system response with reduced backlight or reduced audio output when switching off system.

Diagnostic depth

Detection

If (FAN_SPEED =1 and RPM != 3100 +- 15%) or (FAN_SPEED = 0 and RPM != 2325 +- 15%). This fault will be checked during run-time.

Possible cause

- Fan is broken or dirty - Extrem high alltitude can also cause problems due to the low air pressure.

{ } Raw XML
diag