Faulty pin configuration for hardware identification
â–¶ How to fix
Check the connection to the hardware id pins.
What you'll see
No driver-visible symptom recorded.
System reaction
Amber warning lamp, indicating ECU hardware identification error, will be lit in the instrument cluster.
Diagnostic depth
Detection
The DTC will be set to active if one of the following conditions are fulfilled: * The pin configuration has changed since system startup. * The configured ID is not within the allowed range, which is described in the Workshop Manual (WSM).
Possible cause
* Bad connection on one or more of the configuration pins. * The selected ID is not within the valid range, which is described in the bodybuilder manual.