PWM6 output is overloaded (current > 0.5A )
â–¶ How to fix
Check wiring, connectors and load connected to PWM6 output (pin 30).
What you'll see
No driver-visible symptom recorded.
System reaction
Output operational status shall be set to disabled. The status of the pin shall be indicated as Not Available/Error. Yellow warning in the instrument cluster.
Diagnostic depth
Detection
The DTC is set to active if: - If the output is overloaded, output current to the PWMO6 exceeds 0.5A The DTC can only be set to inactive after a restart.
Possible cause
Defect wiring - defect load - defect connectors