S Scania Multi πŸ“Œ unpin β€” β–’ Γ—
Pin a chassis:
Home Vehicle Parts Information Workshop Diagnostics Search Back Forward Help
V
DTC β€Ί BMU5 BMU5 / 0276 4 variants

Battery pack bad cell temperature balance

β–Ά How to fix

β€’ Check DTC for water level in coolant expansion tank for the battery cooling circuit. β€’ Check that the water level in the coolant expansion tank is OK. β€’ If the water level is low check for leakage in the battery coolant circuit β€’ Check for coolant leakage in the battery pack (E83). There is a small hole in the battery coolant interface where coolant will come out if there are a leakage in the internal battery coolant circuit. β€’ If leakage in the battery. Change defect hose according to instruction in Multi. β€’ Perform functional test of the battery coolant circuit according to instruction in Multi β€’ Read out the SOH value via SDP3 it should be above 52% (A new battery exchange recommendation parameter will be available later) β€’ Change battery pack(E83) according to instruction in multi and in co understanding with the vehicle owner hence it’s a very expensive part.

What you'll see

No driver-visible symptom recorded.

System reaction

If the temperature difference between the maximum and minimum cell temperature is >15ΒΊ the power is reduced in the hybrid system.

Diagnostic depth

Detection

Maximum cell temperature – minimum cell temperature > 15ΒΊC

Possible cause

β€’ Cells are defective or worn out β€’ Insufficient or uneven cooling of battery pack - internal fault β€’ Low coolant level or coolant pump malfunction.

βŠ• 3 other variants β€” show diff { } Raw XML
diag