GPS antenna overloaded
Turn off the 15 voltage and wait 10 s. Turn the 15 voltage on again and wait 30 s until the control unit has started. Clear the fault codes. Wait for 30 s. Read the fault codes again. If the fault code is still present, check the GPS antenna visually. Remove the electrical cables from the antenna and check the connectors visually. Check the continuity in the disconnected GPS antenna cable using a multimeter.
What you'll see
No driver-visible symptom recorded.
System reaction
No system-reaction text recorded.
Diagnostic depth
The fault code is activated when the connection between the GPS module connector and the GPS antenna has been interrupted for more than 25 seconds.
The GPS antenna has short-circuited. The GPS antenna is defective. The connected GPS antenna is not compatible with the control unit. The correct antenna is a 3.3 V active antenna.