ED2 power take-off
â–¶ How to fix
Check the solenoid valve for the ED2 gearbox-driven power take-off, including cable harness and connectors. Measure the voltage between the coordinator's pin for the ED2 power take-off and ground with the power take-off active. The actual pin for this vehicle is indicated under the Check tab in SDP3.
What you'll see
No driver-visible symptom recorded.
System reaction
No system-reaction text recorded.
Diagnostic depth
Detection
The voltage in the solenoid valve circuit for the ED2 gearbox-driven power take-off is low even though the output is activated.
Possible cause
The fault may be due to: The circuit may have been shorted to ground. Faulty solenoid valve.