Faulty Steering Angle Sensor (SAS) unit
â–¶ How to fix
* Check that the sensor is firmly attached to the steering column. * Check the power supply to the sensor * Clear the DTC and check if it returns. * Perform a sensor calibration. * If non of the above action helps and the DTC remains, replace the sensor.
What you'll see
No driver-visible symptom recorded.
System reaction
• Functions dependent on information from SAS are degraded. Examples listed below. - Scania Driver Support - Lane Departure Warning
Diagnostic depth
Detection
The Steering Angle Sensor (SAS) reports that it is not working correctly
Possible cause
Possible causes: * The sensor is not firmly attached to the steering column so the sensor is out of range. * The sensor is faulty (electrical or mechanical internal fault)