0x802800;Passenger side-airbag not expected
1. Check that a corresponding "high-resistance" DTC is not set for another firing loop for the ECU. If yes check vehicle not expected that the installed squibs are correctly configured, if not expected of squibs is in accordance with vehicle SOPS then repair cabling so that the squibs are connected to correct ECU inputs. 2. If no corresponding "high-resistance" DTC is set check that squib should not be configured according to SOPS/vehicle not expected.
What you'll see
No driver-visible symptom recorded.
System reaction
Indication: CSS (airbag) malfunction warning indication is displayed in ICL Consequence: In case of a crash all connected airbags/belt-pretensioners will be fired
Diagnostic depth
It has been detected that a component has been connected to the passenger side-airbag pins, which was not expected by the current squib configuration
The ECU has detected the electrical characteristics of an equipped ignition loop on an ignition loop that should not be equipped with airbag or beltpretensioner