S Scania Multi 📌 unpin — ▢ ×
Pin a chassis:
Home Vehicle Parts Information Workshop Diagnostics Search Back Forward Help
V
DTC › CSS2 CSS2 / C07388

0xC07388,CAN Bus Off

â–¶ How to fix

1. Check if other ECUs in system have raised same DTC, this could indicate a green CAN-bus failure and should perhaps be problem resolved first. If not, continue to next instruction. 2. Disconnect CSS ECU side cable connector and switch off ignition (U15) 3. Measure resistance between CAN Low and High pins on connector, if resistance is about 60 Ohms then problem is likely with ECU, replace it. Otherwise continue to next instruction. 4. Problem is likely with ECU CAN wires, check for wire breakage on CAN low and high as well as cross-coupling.

What you'll see

No driver-visible symptom recorded.

System reaction

Indication: CSS (airbag) malfunction warning indication is displayed in ICL Consequence: Vehicle data from CAN cannot be recorded to crash recorder in case of crash

Diagnostic depth

Detection

CAN Communcation interrupted

Possible cause

CAN High and CAN Low lines are crosscoupled CAN is disconnected from ECU, Short Circuit between CAN high and CAN low, CAN High short-circuit to plus or ground, CAN Low short circuit to plus

{ } Raw XML
diag