Reduction of assistance torque due to high motor temperature
Step-1: Switch-Off the ECU. (i.e. Klemme-15 Off) Step-2: Let the ECU cool-down until the motor temperature is < 189°C. Step-3: Power-on the ECU (i.e. Klemme-15 On) after the motor temperature is < 189°C. Step-4: Replace the powerpack if the SPN is still active.
What you'll see
The driver detects the following: Degradation of EPS motor torque depending on temperature characteristics.
System reaction
Set the Yellow Lamp to "On". EPS Motor torque reduces to 30%. DTC not affected ASM functionality, ASM functionality active with reduction.
Diagnostic depth
Motor temperature > 189°C. The DTC will set during the following condition: 1.System state: DriveDown, DriveUp. 2.System voltage is above 6v. 3.System voltage is below 42v.
1. Defective powerpack. 2. Over heating of the powerpack.