Axle Load Sensor Wheel 9 : not configured
â–¶ How to fix
Check the cables and connectors from the ALS to the corresponding EPM (including check for chafing damage). If no error found, check the EoL parameters. If no error found, check with other ALS. If error still active, check with other EPM (check that the EPM is prepared for ALS connected) . If error still active, check with other central ECU.
What you'll see
No driver-visible symptom recorded.
System reaction
Axle load measurement off. Yellow EBS Warning Lamp.
Diagnostic depth
Detection
The error is set if the ALS is configured but no signal or sensor supply detected.
Possible cause
Damage in the wiring and/or connectors between ALS and EPM, improper configuration, not populated EPM, no sensor installed, damaged ALS, damaged EPM, damaged ECU