Sensor signal from level sensor for right-hand side of driving axle.
â–¶ How to fix
Check the level sensor and its attachment. Also check the cable harness on the right and left-hand sides of the drive shaft to make sure they have not been switched.When the sensor is renewed, the control system must be calibrated using SDP3.
What you'll see
No driver-visible symptom recorded.
System reaction
No system-reaction text recorded.
Diagnostic depth
Detection
The voltage on the input from the level sensor is outside the valid range (2.97V-5.25V).
Possible cause
This fault code is generated if the level sensor signal is irregular or incorrect. For example, the level sensor attachment or the sensor itself may be damaged.