Fuel pressure in the accumulator
Warning! The fuel system has a very high pressure, up to 3000 bar. The fuel system must be depressurised before any work is carried out. The system should always be treated as pressurised, even when the engine is switched off. Wear protective gloves and goggles. For more information about safety when working with the fuel system, refer to service information "XPI fuel system" If there are other fault codes on any injector, troubleshoot the injectors. If fault code 0094 for a small leak in the high pressure side has been generated, it must be rectified first. Check how large the leak is; follow Checking for internal leaks. Check fuel inlet metering valve V120; follow Checking the fuel inlet metering valve. Check the safety valve; follow Leak testing the safety valve. Check injector for internal leakage; follow Fuel leak test. Troubleshoot the high pressure side according to the instructions, see Workshop manual, 03-00 Fuel and exhaust system assembly, 03:14-01 Fuel system XPI troubleshooting. Troubleshoot the low pressure side according to the instructions, see Workshop manual, 03-00 Fuel and exhaust system assembly, 03:14-01 Fuel system XPI troubleshooting. Troubleshoot the high pressure pump according to the instructions, see Workshop manual, 03-00 Fuel and exhaust system assembly, 03:14-01 Fuel system XPI troubleshooting.
What you'll see
No driver-visible symptom recorded.
System reaction
There may be black smoke from the engine. When this fault code is active, engine power is reduced and the EGR system is deactivated. The fault code cannot be deleted when it is active.
Diagnostic depth
Fuel pressure in the accumulator is lower than requested.
Possible causes: • Internal or external leakage in the high pressure side. • Damaged fuel lines • Fault in fuel inlet metering valve V120. • Insufficient fuel supply from the low pressure side. • Fault in the high pressure pump.