S Scania Multi 📌 unpin — ▢ ×
Pin a chassis:
Home Vehicle Parts Information Workshop Diagnostics Search Back Forward Help
V
DTC › EME1 EME1 / 0219

Engine Overspeed, Value to high

â–¶ How to fix

If the DTC seems to be caused by shifting down to a wrong gear, erase the DTC. If not: Check for fuel or oil leakages into the air intake system. Check for injector leakage and oil leakage into the cylinders.

What you'll see

No driver-visible symptom recorded.

System reaction

No system-reaction text recorded.

Diagnostic depth

Detection

Engine speed has been higher than 3000 rpm. This test is performed if engine is running and both engine speed sensors receives detects correct pulse pattern.

Possible cause

This error might occur when shifting down to a wrong gear. The engine is not designed for these high speeds. The fault might also depend on an oil or fuel leakage (for example in the compressor or in some injector) into the intake air system or into the cylinders which makes the engine uncontrollable.

{ } Raw XML
diag