S Scania Multi ๐Ÿ“Œ unpin โ€” โ–ข ร—
Pin a chassis:
Home Vehicle Parts Information Workshop Diagnostics Search Back Forward Help
V
DTC โ€บ EML1 EML1 / 0103 4 variants

Mass Airflow Sensor ( T126 )

โ–ถ How to fix

Check the connectors and electrical wiring. Note Always perform a reset of adaption values โ€‹โ€‹of the mass air flow sensor if the mass air flow sensor is replaced, or if a leak in the engine intake system have been fixed For EUV engines: If the operating time with the error code active is more than 10 hours, the EGR cooler should be drained because it is likely that the condensation has formed in the air-cooled EGR cooler when the EGR system has been turned off. Perform emptying according to the instructions in the Service Manual, section 01-65. To verify that the fault is fixed, carry out a free acceleration and check that the MAF signal moves

What you'll see

No driver-visible symptom recorded.

System reaction

The ECU turns off the EGR system. Engine power is reduced Depending on the legal requirements for the engine it may not be possible to erase the fault code if it is active.

Diagnostic depth

Detection

The voltage in the circuit has been higher than allowed

Possible cause

Short circuit to battery voltage

โŠ• 3 other variants โ€” show diff { } Raw XML
diag