PBC CAN Message - Checksum or Counter Failure
Check short-circuits and open-circuits on orange CAN lines and assure that source ECUs (EBS / Coordinator) work correctly.
What you'll see
No driver-visible symptom recorded.
System reaction
No inhibitions and external requests performed. Yellow warning lamp.
Diagnostic depth
CRC or message counter error in PBC message from Coordinator ECU. When checksum calculated by EPB ECU is different from the checksum received with the message - fault is set immediately. Fault is also set when a counter received with the message does not equal the next counter value for the previous message - at least two times. Furthermore, the fault will be set when the message is received faster than the nominal update rate and at least one message was lost. Clearing checksum fault requires two following messages with correct checksum and counter values with nominal update rate.
Electromagnetic disturbance, any of source ECUs send invalid values because of an internal reason or error