RightRedLEDOpenCircuit
Check harness connection points. Replace in order: Harness, LED-module or HLC.
What you'll see
Right side red LED is open circuit.
System reaction
FDC >= PreFailureLimit (DID = 0xFD10) will: *Set HMILEDStatus to 0x01 (= Nok) for corresponding output. *Turn off corresponding output for enabling offline diagnostic. FDC = -128 will: *Set HMILEDStatus to 0x00 (= Ok) for corresponding output (if no other DTC has FDC >= PreFailureLimit). *Allow corresponding output to be turned on again.
Diagnostic depth
-Test Failure Criteria/Validation Criteria Offline diagnostic PWM output voltage / PWM output current > OfflineFailureResistance (DID = 0xFD30) Online diagnostic PWM output voltage / PWM output current > OnlineFailureResistance (DID = 0xFD30)
Open circuit in harness or within the LED module.