Crankshaft position sensor
- Check lines of camshaft position sensor - Check plug connection of camshaft position sensor and EGC4 - Check installation of the camshaft position sensor - Check gap width between camshaft-wheel and camshaft position sensor - Check the camshaft-encoderwheel of the camshaft (6+1) for contortion - Check camshaft position sensor for contamination - Renew camshaft position sensor
What you'll see
No driver-visible symptom recorded.
System reaction
- Engine starts bad or doesn´t start at all - Engine runs disturbed - Torque is limited
Diagnostic depth
—
- loose contact on plugs - changed air space between sensor and generator wheel - failure on sensor line cause of starter - failure on sensor line cause of control impulse of ignition or injection vibration from generator wheel in because of engage the starter deformed or broken teeth on crnakshaft generator wheel