Rotational speed sensor
â–¶ How to fix
Check the sensor, connector and cable harness. If the fault code 332F, 3390 or 33F4 have been generated check the gearbox mechanically. Check that the washer and neutral spring are correctly fitted and that the splines on the longitudinal stroke lever and/or actuating shaft are not sticking.
What you'll see
No driver-visible symptom recorded.
System reaction
No system-reaction text recorded.
Diagnostic depth
Detection
Incorrect or unreliable data.
Possible cause
The rotational speed sensor for the output shaft is defective, or the cables to the speed sensor are damaged. If the faults 332F, 3390 or 33F4 have also been generated, then the fault is probably mechanical for the operation of Opticruise.