S Scania Multi 📌 unpin — ▢ ×
Pin a chassis:
Home Vehicle Parts Information Workshop Diagnostics Search Back Forward Help
V
DTC › S6IM S6IM / 018D

Supply pressure sensor – Fuel System

â–¶ How to fix

Check the fuel supply pressure sensor, coolant temperature sensor, charge air pressure sensor, charge air temperature sensor and fan speed sensor, along with the connectors and electrical cables in the circuit.

What you'll see

No driver-visible symptom recorded.

System reaction

There is a common power supply for the fuel supply pressure sensor, coolant temperature sensor, charge air pressure sensor, charge air temperature sensor and fan speed sensor. If a fault occurs in one of thesensors, this can affect the circuits of the other sensors.If the voltage is outside the permitted range, the control unit uses a preprogrammed value.The maximum engine torque is limited by approximately 30% as long as the fault is active.

Diagnostic depth

Detection

The voltage in the circuit has been above the permitted level.

Possible cause

Possible causes:- Open circuit in the fuel temperature sensor circuit. - The fault may also be caused by a fault on the voltage supply to those components which share their voltage supply. If a fault is indicated on the oil pressure sensor at the same time, there is probably a fault on the shared internal voltage supply.

{ } Raw XML
diag