Checksum failure - Configuration data
â–¶ How to fix
Internal error - Checksum - replace unit
What you'll see
Disturbed functionality
System reaction
DSRC module will use default configuration
Diagnostic depth
Detection
Test execution:The checksum check shall be done during start-up. Information:If the stored checksum is not equal to calculated checksum the fault shall be active. Validation:The fault shall be set as 'test failed' once the fault is active.2 operation cycles to confirmed. Invalidation:The fault shall not be allowed to be deactivated during the same operational cycle as when detected.
Possible cause
Configuration data is compromised.