GPS antenna overloaded
Restart the system using the following procedure: Exit the program. Switch off the power.Press the On/Off button on RTI unit for at least four seconds. (An acoustic signal will be heard.)Wait for at least five seconds. Then switch on the power and start the RTI unit. Read the fault codes again. If the fault code is still present, check the GPS antenna visually. Remove the electrical cables from the antenna and check the connectors visually. Check the continuity in the disconnected GPS antenna cable using a multimeter. If necessary, renew the GPS antenna and/or antenna cables.
What you'll see
No driver-visible symptom recorded.
System reaction
No system-reaction text recorded.
Diagnostic depth
GPS antenna has excessively high supply voltage or is short circuited. The fault code is activated when the connection between the control unit and the GPS antenna has been interrupted for more than 25 seconds.
The GPS antenna is short circuited. The GPS antenna is defective. The connected GPS antenna is not compatible with the control unit. The correct antenna is a 3.3 V active antenna.