Low supply voltage
â–¶ How to fix
Check all connections.Check that the cable harness for the supply voltage is connected as per the wiring diagram. Check the continuity in the cable harness with a multimeter. The voltage must be between 11.6-15.6 V. Check the voltage converter. Renew it if necessary.
What you'll see
No driver-visible symptom recorded.
System reaction
No system-reaction text recorded.
Diagnostic depth
Detection
The supply voltage for the control unit is too low. The fault code is activated when the supply voltage falls below 11.6 V for more than 60 s and there is a wake-up signal. The control unit switches off when the supply voltage falls below 6 V.
Possible cause
The control unit is incorrectly connected to the voltage converter. The voltage converter is defective.