S Scania Multi 📌 unpin — ▢ ×
Pinned chassis: 1158124 R113ML6X2L 36046Z 942650 Unpin
Home Vehicle Parts Information Workshop Diagnostics Search Back Forward Help
V
DTC › TMS3 TMS3 / 0204

TCProp CAN message missing from the coordinator.

â–¶ How to fix

Check the wiring and connectors on TMS (E5) and COO (E30).

What you'll see

No driver-visible symptom recorded.

System reaction

Initially the last valid selected drive mode shall be maintained. When the error is confirmed (after 5 seconds), a DTC (0x0204) together with a yellow gearbox malfunction warning lamp shall be set. In addition, Drive shall be activated if Neutral was previously active to avoid Vehicle Off Road (VOR). To switch from Drive to Reverse with a broken gear lever the parking brake shall be applied and the brake pedal shall be pressed for 5 s. To switch to Drive again the brake pedal shall be released and pressed again for 5 s.

Diagnostic depth

Detection

ECU indicating timeout on message Transmission Control Proprietary.

Possible cause

The harness or connectors has open circuit or the message has not been transmitted by coordinator.

{ } Raw XML
diag