S Scania Multi 📌 unpin — ▢ ×
Pin a chassis:
Home Vehicle Parts Information Workshop Diagnostics Search Back Forward Help
V
DTC › WTA2 WTA2 / 01F0E5

0x01F0E5, Coolant Temperature Sensor Open Load

â–¶ How to fix

- check coolant temperature sensor - replace coolant temperature sensor - check wiring harness - for further information see workshop manual - clear error memory

What you'll see

No driver-visible symptom recorded.

System reaction

- this DTC is stored in the error memory - heating operation is disabled Heater Actions: * This DTC is an error * Temporary Interlock is activated * counter "SZ / general error counter" is incremented

Diagnostic depth

Detection

Enable Condition: This error is monitored while heater is active. (LS.Internal.HeaterStateSimplified = HeaterBurnerStarting or LS.Internal.HeaterStateSimplified = HeaterBurnerActive or LS.Internal.HeaterStateSimplified = HeaterBurnerStopping or LS.Internal.HeaterStateSimplified = HeaterBurnerNotActive) Mature Threshold: Open load in coolant temperature sensor circuit detected. This DTC is reported by the heater core software. De-mature Criteria: Stable combustion reached after restart of heater: Heating request is switched off (HeaterModeRequest = DeactivateHeater) and on (HeaterModeRequest = NormalMode) and state HEATER RUNNING is reached

Possible cause

- defect coolant temperature sensor - coolant temperature sensor not connected to ECU - defect in wiring harness - ECU hardware failure

{ } Raw XML
diag