0x06F0E5, Coolant Pump Open Load
- restart heater (component-internal reset after overheating of pump) - check coolant pump - check wiring harness - for further information see workshop manual - clear error memory
What you'll see
No driver-visible symptom recorded.
System reaction
- this DTC is stored in the error memory - heating operation is stopped - failure afterrun is initiated Heater Actions: * This DTC is an error * Temporary Interlock is activated * counter "SZ / general error counter" is incremented
Diagnostic depth
Enable Condition: This error is monitored before and while coolant pump is active. Mature Threshold: Open load in coolant pump circuit detected. This DTC is reported by the heater core software. De-mature Criteria: Stable combustion reached after restart of heater: Heating request is switched off (HeaterModeRequest = DeactivateHeater) and on (HeaterModeRequest = NormalMode) and state HEATER RUNNING is reached
- coolant pump not connected - coolant pump defect - ECU hardware failure - line interruption in wiring harness - coolant pump overheated - no coolant in the system / ingen kylvätska i systemet