S Scania Multi 📌 unpin — ▢ ×
Pin a chassis:
Home Vehicle Parts Information Workshop Diagnostics Search Back Forward Help
V
DTC › ZF4 ZF4 / FF0049

T_SUMP_MALFUNCT_ADC_BELOW; Transmission oil sump temperature sensor; Voltage below lower limit

â–¶ How to fix

Switch off ignition; Disconnect electronics; Connect transmission test cable; Measure resistance of the temperature sensor (pin 4) against the sensor ground terminal (pin 15); Nominal value: 20°C -> approx. 62.3 kohm, 80°C -> approx. 6.3 kohm, 140°C ->approx. 1.2 kohm; For additional values, see temperature sensor data sheet; Check cable TCU -> transmission; Note: The voltage at the PIN can not be used because the voltage is split internally; If you find deviations from the nominal value, check wiring and component;

What you'll see

No driver-visible symptom recorded.

System reaction

Deactivate Neutral Standby;Deactivate Automatic Idle Shift;Deactivate shifting pressure adaption and use last adaption values;Reduced engine torque;Switch to duty cycle signal Limp Home from Shift Console;

Diagnostic depth

Detection

ADC value hot < 95, corresponds to >175°C; Normal mode

Possible cause

Increased fuel consumption Reduced driving performance Reduced retarder braking performance;

{ } Raw XML
diag