DTC ›
BCI2
| Code | Heading | Variants |
|---|---|---|
| 0200 | ECU hardware memory failure | — |
| 0201 | Illegal software operation | — |
| 0202 | Overloaded software resources | — |
| 0203 | Inconsistent long term RAM data | — |
| 0204 | Loss of KWP2000-ECU ID data | — |
| 0205 | Loss of operation data | — |
| 0206 | Loss of function parameters | — |
| 0207 | Electrical error on Yellow CAN bus (CAN1 BusOff) | — |
| 0208 | Absence of Yellow bus CAN communication (CAN1 buffer overflow) | — |
| 0209 | TCO node: timeout in CAN communication | — |
| 020A | EMS node: timeout in CAN communication | — |
| 020C | Electrical error on external CAN bus | — |
| 0210 | Parking Brake Sensors are malfunctioning | — |
| 0211 | Absence of external bus CAN communication (CAN3 buffer overflow) | — |
| 0212 | Absence of expansion CAN bus communication (CAN2 buffer overflow) | — |
| 0213 | Electrical error on expansion CAN bus | — |
| 0216 | Electrical error on FMS CAN bus | — |
| 0217 | Absence of FMS bus CAN communication (CAN4 buffer overflow) | — |
| 0218 | Not Valid | — |
| 0219 | Not Valid | — |
| 021A | Unconfigured expansion unit. | — |
| 021B | BIC-program contains a signal/pin not available for current vehicle configuration | — |
| 021C | Invalid BIC-program | — |
| 021D | Not Valid | — |
| 021E | Expansion unit A: Network configuration error | — |
| 021F | Expansion unit B: Network configuration error | — |
| 0220 | Expansion unit C: Network configuration error | — |
| 0221 | Expansion unit D: Network configuration error | — |
| 0222 | Expansion unit E: Network configuration error | — |
| 0223 | Expansion unit F: Network configuration error | — |
| 0224 | Expansion unit G: Network configuration error | — |
| 0225 | Expansion unit H: Network configuration error | — |
| 0226 | Expansion unit I: Network configuration error | — |
| 0227 | System voltage is below 16 V. | — |
| 0228 | System voltage is above 32 V. | — |
| 0229 | APS node: timeout in CAN communication | — |
| 022A | COO node: timeout in CAN communication | — |
| 022B | EBS node: timeout in CAN communication | — |
| 022C | GMS node: timeout in CAN communication | — |
| 022D | ICL node: timeout in CAN communication | — |
| 0230 | The BIC-program is partially disabled due to faulty input. | — |
| 0231 | Sidewalk detection sensor malfunction, check sensor | — |
| 0233 | Short Circuit to Battery on PWM Output 1 | — |
| 0234 | Over current on PWM 2 | — |
| 0236 | Over current on PWM 3 | — |
| 0238 | Over current on PWM 4 | — |
| 023A | Over current on PWM 5 | — |
| 023C | Over current on PWM 6 | — |
| 023E | Communication with expansion unit A is interrupted or missing. | — |
| 023F | Communication with expansion unit B is interrupted or missing. | — |
page 1 of 9
next →