DTC ›
ZF5
| Code | Heading | Variants |
|---|---|---|
| FF004F | Development tool active | — |
| FF0050 | AU1 power supply short circuit to ground | — |
| FF0051 | AU1 power supply short circuit to positive supply (VPS) | — |
| FF0053 | AU2 power supply short circuit to ground | — |
| FF0054 | AU2 power supply short circuit to positive supply (VPS) | — |
| FF0059 | Retarder safety monitor | — |
| FF005A | ER4 oil level sensor signal missing | — |
| FF005B | ER4 oil level sensor signal failure | — |
| FF005C | CAN_ initialization error | — |
| FF005D | CAN_A BUSOFF | — |
| FF0063 | Neutral ready - SMON | — |
| FF0064 | Slip monitor WK | — |
| FF008F | CAN A TX- sending error | — |
| FF009A | Speed curve safety monitor | — |
| FF009B | Checksum EEPROM incorrect | — |
| FF009C | Composite error for TCU hardware (internal) | — |
| FF009D | Composite error for TCU software (internal) | — |
| FF00A3 | n_Tu and n_Ab failed | — |
| FF00A4 | n_Tu and n_Mot failed | — |
| FF00A5 | n_Mot and n_Ab failed | — |
| FF00BB | Direction of travel safety monitor | — |
| FF00BC | Slip in fixed gear | — |
| FF00E8 | n_Ab, n_Tu, and n_Mot failed | — |
| FF00EB | Sump temperature too high | — |
| FF00EC | Sump temperature overheated | — |
| FF00ED | Retarder temperature too high | — |
| FF00EE | Retarder temperature overheated | — |
| FF0104 | Desk mode is activated | — |
| FF013D | Engine torque at stall speed is too high | — |
| FF0155 | OIL_SENSOR_MALFUNCT_ADC_BELOW | — |
| FF0156 | OIL_SENSOR_MALFUNCT_ADC_ABOVE | — |
| FF015B | The EEPROM data field has not been written in | — |
| FF0174 | TCU Hardware error | — |
| FF0178 | Downshift safety monitor | — |
| FF0181 | ADC_MON_ERROR | — |
| FF0186 | Electric_Current_Calibration_CRC_ERROR | — |
| FF0187 | EEprom_CRC_ERROR | — |
| FF01A8 | temperature torque converter too high | — |
| FF01A9 | temperature torque converter overheated | — |
| FF01AA | Calibration data wrong | — |
| FF01AB | oil level sensor signal failure | — |
| FF903D | U_Kl_15 signal not plausible | — |
| FF9040 | Kl_30 TCU power supply failure low | — |
| FF9041 | Kl_30 TCU power supply failure high | — |
| FF905F | CAN A error passive | — |
| FF9060 | CAN_A error warning | — |
| FF906E | EEC1_FROM_ENGINE.Timeout | — |
| FF906F | EEC2_FROM_ENGINE.Timeout | — |
| FF9070 | EEC3_FROM_ENGINE.Timeout | — |
| FF9071 | ENGCONF_FROM_ENGINE.Timeout | — |