The following applies when drilling in the chassis frame:– The maximum drill hole diameter is 15.5 mm– The distance between 2 holes must be at least 50 mm.– Drill holes must be located at least 15 mm from the edge.– Drill holes must be located at least 25 mm from the crossmember lead throughs.

Workshop manuals › The following applies when drilling in the chassis frame:– The maximum drill hole diameter is 15.5 mm– The distance between 2 holes must be at least 50 mm.– Drill holes must be located at least 15 mm from the edge.– Drill holes must be located at least 25 mm from the crossmember lead throughs. 140985 0

The following applies when drilling in the chassis frame:– The maximum drill hole diameter is 15.5 mm– The distance between 2 holes must be at least 50 mm.– Drill holes must be located at least 15 mm from the edge.– Drill holes must be located at least 25 mm from the crossmember lead throughs.

ID: 140985
Type: 0
Legal: false

Filter

1=B

Related wiring 1

S0000040985