P, G, R and T series/L, P, G, R and S series

Workshop manuals › P, G, R and T series/L, P, G, R and S series 61 activities 78 ✱ variants

Document

ID: 1
Business key: PDIL
Type: 78

Variant filter

This inspection form is used if the following conditions are met:

• The vehicle is fitted out and mounted with bodywork by an external bodybuilder. • If the above condition is not met, carry out a Small pre-delivery inspection. Keep one copy of each of the following documents at the dealer: Form for performed pre-delivery inspection of the vehicle and Declaration of Conformity (DoC), if available in paper format. The latter document contains information on the bodywork.

1=A&1323=E!1=A&1323=F

Activities 61

ID	Heading	Component	MG	Filter
1207	The form applies to the P, G, R and T series false	0		1=A&1323=E
1208	The form applies to the L, P, G, R and S series false	0		1=A&1323=F
344	Check for gas leakage before running-in in the workshop false	Fuel system	03	1=A&1323=E&520=C!1=A&1323=F&520=C!1=B&1323=E&520=C!1=B&1323=F&520=C
419	Check that the vehicle is not leaking fuel before running-in in the workshop. false	Fuel system	03	1=A&1323=E&520=B!1=A&1323=F&520=B!1=B&1323=F&520=B
1660	Make sure that the starter key/starter button is in drive mode and that the function is deactivated via the switch for idle stop and start. false	Idle stop and start function	16	1=A&1323=E&5526=A!1=A&1323=F&5526=A!1=B&1323=E&5526=A!1=B&1323=F&5526=A
1654	Carry out Procedures for all workshop operations on electric vehicles before starting work. Information about these procedures can be found in the instructions. false	Electric vehicle	00	1=A&1323=F&4034=C!1=B&1323=F&4034=C
1658	Carry out Procedures for all workshop operations on hybrid vehicles before starting work. Information about these procedures can be found in the instructions. false	Hybrid vehicles	00	1=A&1323=E&4034=B!1=A&1323=F&4034=B!1=B&1323=E&4034=B!1=B&1323=F&4034=B
394	(no heading) false	—		—
1216	Check that the Declaration of Conformity (DoC, a document which confirms that the bodywork has been carried out in accordance with Scania's rules) has been issued, signed and uploaded to SPII. If the bodybuilder has not done this, ask them for the document and make sure that it is uploaded to SPII. false	Bodywork, documentation	00	1=A&1323=E!1=A&1323=F
430	(no heading) false	0		—
622	In the maintenance area false	163		—
354	Lubricate the cab. false	Lubrication	18	1=A&1323=E!1=A&1323=F
284	Fit and adjust the transport-mounted roof air deflector. false	Cab	18	1=A&1323=E!1=A&1323=F&5125=A!1=A&1323=F&5125=B
4	Check-tighten. false	Wheel nuts	09	1=A&1323=E!1=A&1323=F!1=B&1323=F
2	Check the tyre pressure. false	Tyres	09	1=A&1323=E!1=A&1323=F!1=B&1323=F
9	Check the axle weight distribution on vehicles with twin front axles. false	Axle weight distribution	12	1=A&1323=E&1165=B!1=A&1323=F&1165=B
15	Check toe-in on all steered axles. false	Steered axles	13	1=A&1323=E!1=A&1323=F
315	Check for leaks from the gearbox and for rust on the oil filter. Renew the oil filter if there are any signs of rust. Check the oil level. Note: Always top up oil to the edge of the level hole. false	Manual gearbox	05	1=A&1323=E&37=A!1=B&1323=E&37=A!1=A&1323=F&37=A!1=A&1323=E&37=B!1=B&1323=F&37=A!1=B&1323=E&37=B!1=A&1323=F&37=B!1=A&1323=E&37=C!1=B&1323=F&37=B!1=B&1323=E&37=C!1=A&1323=F&37=C!1=A&1323=E&37=D!1=B&1323=F&37=C!1=B&1323=E&37=D!1=A&1323=F&37=D!1=A&1323=E&37=F!1=B&1323=F&37=D!1=B&1323=E&37=F!1=A&1323=F&37=F!1=B&1323=F&37=F
53	Check the oil level. Check for leaks. false	Gearbox	05	1=A&1323=E&37=G!1=B&1323=E&37=G!1=A&1323=F&37=G!1=B&1323=F&37=G
1133	Top up grease in the ACL reservoir. false	Chassis lubrication	00	1=A&1323=E&433=A!1=A&1323=F&433=A!1=A&1323=E&433=B!1=A&1323=F&433=B
1137	Check that clean grease comes out from all bearings. false	Lubrication	00	1=A&1323=E&433=A!1=A&1323=F&433=A!1=A&1323=E&433=B!1=A&1323=F&433=B
31	Lubricate the chassis. false	Lubrication	00	1=A&1323=E!1=A&1323=F!1=B&1323=F
1745	For vehicles with propulsion batteries. Use coolant with a freezing point of -38°C or lower. This corresponds to a minimum of 50% addition of coolant concentrate with corrosion protection in the coolant. false	0		1=A&1323=E&4034=B!1=B&1323=E&4034=B!1=A&1323=F&4034=B!1=B&1323=F&4034=B!1=A&1323=F&4034=C!1=B&1323=F&4034=C
1691	For vehicles with LNG fuel: Use coolant with a freezing point of -38°C or lower. This corresponds to a minimum of 50% addition of coolant concentrate with corrosion protection in the coolant. false	0		1=A&1323=E&5841=B!1=A&1323=F&5841=B!1=B&1323=E&5841=B!1=B&1323=F&5841=B
35	Check the fluid level. Check the freezing point of the fluid: @ °C. Adjust if necessary. false	Cooling system	02	1=A&1323=E&520=A!1=A&1323=F&520=A!1=A&1323=E&520=B!1=A&1323=F&520=B!1=A&1323=E&520=C!1=A&1323=F&520=C!1=B&1323=F&520=A!1=B&1323=F&520=B!1=B&1323=F&520=C
223	Open the valve between the double fuel tanks. false	Fuel system	03	1=A&1323=E&520=A&2154=C!1=A&1323=F&520=A&2154=C!1=A&1323=E&520=B&2154=C!1=A&1323=F&520=B&2154=C
25	Drain condensed water. false	Compressed air tanks	10	1=A&1323=E!1=A&1323=F
98	Check the oil level. Check for leakage. Fill with oil if necessary. false	Engine	01	1=A&1323=E&520=A!1=A&1323=F&520=A!1=A&1323=E&520=B!1=A&1323=F&520=B!1=A&1323=E&520=C!1=A&1323=F&520=C!1=B&1323=F&520=A!1=B&1323=F&520=B!1=B&1323=F&520=C
88	Top up washer fluid. false	Washer fluid	00	1=A&1323=E!1=A&1323=F!1=B&1323=E!1=B&1323=F
1466	Check for damage. Carry out a check of their adjustability and heating function. false	Mirrors	18	1=A&1323=E!1=A&1323=F!1=B&1323=F
1280	Check the battery status and the liquid level. Checking the liquid level is excluded for maintenance-free batteries. false	Batteries, 24 V	16	1=A&1323=E&520=A!1=A&1323=F&520=A!1=A&1323=E&520=B!1=A&1323=F&520=B!1=A&1323=E&520=C!1=A&1323=F&520=C!1=B&1323=F!1=A&1323=F&8393=AB
1249	Check that the tailpipe has been fitted. false	Vertical exhaust system	03	1=A&1323=F&392=C
1209	Check excessive play and function, and lubricate the fifth wheel. false	Fifth wheel	19	1=A&1323=E&39=A!1=A&1323=F&39=A
1203	Check for wear and function, and lubricate. false	Trailer coupling	19	1=A&1323=E&1529=C!1=A&1323=F&1529=C
1739	Check the battery status and the liquid level. Checking the liquid level is excluded for maintenance-free batteries. false	Batteries, 24 V	16	1=A&1323=F&8393=AE!1=A&1323=F&8393=AL!1=A&1323=F&8393=AD!1=A&1323=F&8393=AQ!1=A&1323=F&8393=AG!1=A&1323=F&8393=AR!1=A&1323=F&8393=AS!1=A&1323=F&8393=AF!1=A&1323=F&8393=AH
1655	Carry out Procedures for all workshop operations on electric vehicles after the work has been completed. Information about these procedures can be found in the instructions. false	Electric vehicle	00	1=A&1323=F&4034=C!1=B&1323=F&4034=C
1657	Carry out Procedures for all workshop operations on hybrid vehicles after the work has been completed. Information about these procedures can be found in the instructions. false	Hybrid vehicles	00	1=A&1323=E&4034=B!1=A&1323=F&4034=B!1=B&1323=E&4034=B!1=B&1323=F&4034=B
430	(no heading) false	0		—
453	Before test drive false	—		—
1647	Check that the label for fuel is in place. If the label is missing, apply a new one. false	Fuel system	03	1=A&1323=E&520=A!1=A&1323=F&520=A!1=A&1323=E&520=B!1=A&1323=F&520=B!1=A&1323=E&520=C!1=A&1323=F&520=C!1=B&1323=E&520=A!1=B&1323=F&520=A!1=B&1323=E&520=B!1=B&1323=F&520=B!1=B&1323=E&520=C!1=B&1323=F&520=C
18	Check the function of the lighting. Check all external lighting, retro-reflectors and the horn. Use the controls to check that height adjustment of the headlamps works. false	External lighting, horn	16	1=A&1323=E!1=A&1323=F!1=B&1323=F
902	Check the headlamp adjustment using the equipment. false	External lighting	16	1=A&1323=E!1=A&1323=F
430	(no heading) false	0		—
454	During test drive false	—		—
43	Clutch, gearbox, brakes (functional checks of service, parking, auxiliary and exhaust brakes), instrument and indicator lamps, steering, windscreen wipers/washers and headlamp washers. false	Check the following functions	00	1=A&1323=E!1=A&1323=F
430	(no heading) false	0		—
455	After test drive false	—		—
48	Press the Start button twice to start the computer for the first time. false	Scania Interactor	19	1=A&1323=E&3212=A!1=A&1323=E&3212=D!1=A&1323=E&3212=E!1=A&1323=E&3212=F!1=A&1323=E&3212=G!1=A&1323=E&3212=H!1=A&1323=E&3212=J!1=A&1323=E&3212=K!1=A&1323=E&3212=L!1=A&1323=E&3212=M
47	Activate and calibrate the system. false	Digital tachograph	17	1=A&1323=E&2303=E!1=A&1323=F&2303=E!1=A&1323=E&2303=F!1=A&1323=F&2303=F!1=A&1323=E&2303=G!1=A&1323=F&2303=G!1=A&1323=E&2303=J!1=A&1323=F&2303=J!1=A&1323=E&2303=K!1=A&1323=F&2303=K!1=A&1323=E&2303=L!1=A&1323=F&2303=L!1=A&1323=E&2303=R!1=A&1323=F&2303=R!1=A&1323=E&2303=S!1=A&1323=F&2303=S!1=A&1323=E&2303=ES!1=A&1323=F&2303=ES!1=A&1323=E&2303=FS!1=A&1323=F&2303=FS!1=A&1323=E&2303=GS!1=A&1323=F&2303=GS!1=A&1323=E&2303=TS!1=A&1323=F&2303=TS!1=A&1323=E&2303=US!1=A&1323=F&2303=US!1=A&1323=E&2303=VS!1=A&1323=F&2303=VS!1=A&1323=E&2303=YS!1=A&1323=F&2303=YS!1=A&1323=E&2303=W!1=A&1323=F&2303=W!1=B&1323=F&2303=E!1=B&1323=F&2303=F!1=B&1323=F&2303=G!1=B&1323=F&2303=J!1=B&1323=F&2303=K!1=B&1323=F&2303=L!1=B&1323=F&2303=R!1=B&1323=F&2303=S!1=B&1323=F&2303=ES!1=B&1323=F&2303=FS!1=B&1323=F&2303=GS!1=B&1323=F&2303=TS!1=B&1323=F&2303=US!1=B&1323=F&2303=VS!1=B&1323=F&2303=YS!1=B&1323=F&2303=W
168	Send operational data from vehicle using the diagnostic tool. If there is no working Internet connection, save any retrieved operational data on your computer. The operational data can then be sent to the factory at a later date. false	Operational data	16	1=A&1323=E!1=A&1323=F!1=B&1323=F
96	Read any fault codes. Delete the fault codes. false	Control units	16	1=A&1323=E!1=A&1323=F!1=B&1323=F
211	Set the distance driven for the next maintenance event. Activate the reminder about the next maintenance event. false	Maintenance indicator	16	1=A&1323=E&3646=A!1=A&1323=F&3646=A!1=B&1323=F
1447	Check and run software update packages (Diagnostic tool: Product update > Bundled). false	Software	16	1=A&1323=E!1=A&1323=F!1=B&1323=F
49	Remove transport protection in the cab. Check that paintwork and upholstery are in perfect condition. Fit the towing pin. Fit or fold up one or more radio antennas. Fit loose parts supplied in the cab, e.g. front view mirrors. false	Miscellaneous	18	1=A&1323=E!1=A&1323=F
51	Check that all necessary documentation is provided with the vehicle. Make a note in the Driver's Manual that pre-delivery inspection has been carried out (the time for this is not included). false	Documentation	00	1=A&1323=E!1=A&1323=F
6	Check that all signs required are correctly positioned and in good condition, in accordance with local legal requirements. false	Signs and stickers	00	1=A&1323=E!1=A&1323=F
1281	Check the fuel tanks. false	Fuel tank	03	1=A&1323=E&520=A!1=A&1323=F&520=A!1=A&1323=E&520=B!1=A&1323=F&520=B!1=B&1323=F&520=A!1=B&1323=F&520=B
180	If the vehicle is to be delivered with a trailer, a brake adaptation between the vehicle and trailer should be carried out (the time for this is not included). false	Brake adaptation	10	1=A&1323=E&2452=A!1=A&1323=F&2452=A
117	Carry out a functional check. false	Tag axle lift	08	1=A&1323=E&86=A!1=A&1323=F&86=A
116	Carry out a functional check. false	Air suspension, rear	12	1=A&1323=E&2974=A!1=A&1323=F&2974=A
115	Carry out a functional check. false	Front air suspension	12	1=A&1323=E&2973=A!1=A&1323=F&2973=A

Change history (sv-SE)

2024-04-08: Lagt tillbaka punkten om mjukvaruuppdatering. [bib]
2024-03-22: Tagit bort punkten “Mjukvaror: Kontrollera och kör mjukvaruuppdateringspaket (Diagnosverktyg: Produktuppdatering > Paketerad).<sws><productUpdateReadOut><header><text>Kontrollera och kör mjukvaruuppdateringspaket.</text></header></productUpdateReadOut></sws>”. [bib]
2023-12-07: Ny admonition om kylvätskekoncentrationen för fordon med framdrivningsbatterier. [bib]
2023-11-10: Lagt till om status och vätskenivå för batterier 24 V med placering under hytten för BEV3. [bib]
2023-10-06: Lagt till admonition med info om kylvätskemix för LNG-fordon. [bib]
2023-03-23: Lagt till kontroll av rost vid nivåkontroll, manuell växellåda. [bib]
2023-03-14: Tagit bort kontroll av oljenivå vid leveranskontroll, stor, enligt överenskommelse i FQ407770. [bib] 
2022-03-23: Lagt till kontroll av speglar, främst inriktade på utvändiga. [bib]
2022-03-22: Lagt till separat punkt för oljenivåkontroll i centralväxel R/RB756 för varianterna med oljenivån 9–12 mm under påfyllningshålets nedre kant. [bib] 
2020-01-27: Lagt till om kontroll av CNG/LNG-etiketten. [bib]
2019-10-07: Ändrat titel från Stor leveranskontroll (D). [bib]
2019-09-05: Lagt till admonitions för stopp-start, rutiner vid arbete med hybrid och stänga av gastillförseln.
2019-07-02: Tagit bort om att "kontrollistan" måste finnas med. Det behöver den inte längre. [bib]
2019-01-18: Lagt in nya punkten om att kontrollera och uppdatera mjukvaror. [bib]
2018-10-05: Lagt till ny punkt som består av "kontrollera tankarnas skick" och kontrollera att etiketten finns". [bib]
2018-10-04: Lagt till ny punkt som består av "kontroll av vätskenivå" och "kontroll av status", är ihopslagna med anledning av SWS. [bib]
2018-03-19: Lagt till kontroll av att ändröret är ditsatt. [bib]
2017-10-19: Lagt till smörjning (chassi, hytt, vändskiva och dragkrok) även fyll på ACL-behållaren och att det kommer ut rent fett. [bib]
2017-06-12: Ändrat sista punkten i "Varianttext" från följande • Spara leveransprotokollet i 2 exemplar. Ett exemplar ska sparas hos verkstaden och ett i fordonets pärm. Ändrat till formuleringen enligt ovanför i sista punkten. [bib]
2017-03-20: Tagit bort överenskomna punkter om kontroll av påbyggnad enligt JIRA WSM-17365. [bib]
2016-08-19: Tagit bort dubbla punkter om kontroll av oljenivån i centralväxeln. [bib]
2016-07-12: Generationsbeteckning där protokollpunkterna börjar. I och med att vi har gemensamma protokoll för PGRT och PGRS (NCG) behöver vi ange båda under protokollhuvudet. [bib]
2015-10-13: Uppdaterat villkorssättningen för NCG. [bib]
2015-06-05: Ny punkt för kontroll av oljenivå centralväxel till NCG. [bib]
2014-12-22: Tagit bort punkten "Gäller för fordon utan batterifrånskiljare. Sätt dit nedanstående säkringar om fordonet är specificerat med motsvarande utrustning: 29 - För Hino, sätt dit säkring 1 på reläplats 20 samt 34, 37 och 43." [bib]
2014-09-12: Lagt till kontroll av oljenivå på axelväxlar bak med navväxlar. [bib]
2014-05-26: Tagit bort punkten "Öppna TRV-ventilen genom att vrida vredet till stopp-positionen.". Förtydligat med extern påbyggare i varianttexten. [bib]
2013-12-20: Flyttat punkter om påbyggnad till "Vid tillsynsplatsen". [bib]
2013-07-09: Förtydligat med punkterna om kontroll av utvändig belysning. [bib]
2013-07-02: Lagt till om mjukvaru-uppdatering. [bib]
2013-07-01: Lagt till om TRV-ventilen. [bib]
2012-02-22: Tagit bort den första raderingen av felkoder. Nu sker det bara en gång per tillsyn. (dbn)
2011-12-05: Lagt in om brandförebyggande kontroll av påbyggnaden samt fixat flödet. [bib]
2011-12-02: Flyttat punkten att skicka driftdata så att den nu sker senare i tillsynen. (dbn)
2011-11-11: Lagt till punkt om att kontollera olja i manuell växellåda. (dbn)
2011-11-10: Lagt till utläsning av driftdata. (dbn) Lagt till varianttext. [bib]
2011-11-03: Uppdaterat enligt FM utgåva 11. [sssbib]
Ändringar t.o.m utgåva 10 är inarbetade (090227). Namnet ändrades.
Ändringar t.o.m utgåva 8 är inarbetade (080910).
Ändringar t.o.m utgåva 7 är inarbetade (080312).
Ändringar t.o.m utgåva 6 är inarbetade (071203).
Alla ändringar inför Multi 0711 är klara (070712). Alla ändringar t.o.m preliminära utgåva 6 av FM-protokollet är inarbetade.