S Scania Multi 📌 unpin — ▱ ×
Pin a chassis:
Home Vehicle Parts Information Workshop Diagnostics Search Back Forward Help
V
Workshop manuals › P, G, R and T series/L, P, G, R and S series 31 activities 79 ✱ variants

Document

ID
14
Business key
PDIS
Type
79
Variant filter
This inspection form is used if the following conditions are met:
€ The vehicle is delivered directly from the factory via the dealer to the customer.€ The vehicle is a tractor with 4x2, 6x2 or 6x4 wheel configuration that has not been converted.€ If the conditions are not fulfilled, carry out Large pre-delivery inspection (D).
1=A&1323=E!1=A&1323=F

Activities 31

ID Heading Component MG Filter
1207 The form applies to the P, G, R and T series false 0
1=A&1323=E
1208 The form applies to the L, P, G, R and S series false 0
1=A&1323=F
344 Check for gas leakage before running-in in the workshop false Fuel system 03
1=A&1323=E&520=C!1=A&1323=F&520=C!1=B&1323=E&520=C!1=B&1323=F&520=C
419 Check that the vehicle is not leaking fuel before running-in in the workshop. false Fuel system 03
1=A&1323=E&520=B!1=A&1323=F&520=B!1=B&1323=F&520=B
1660 Make sure that the starter key/starter button is in drive mode and that the function is deactivated via the switch for idle stop and start. false Idle stop and start function 16
1=A&1323=E&5526=A!1=A&1323=F&5526=A!1=B&1323=E&5526=A!1=B&1323=F&5526=A
1654 Carry out Procedures for all workshop operations on electric vehicles before starting work. Information about these procedures can be found in the instructions. false Electric vehicle 00
1=A&1323=F&4034=C!1=B&1323=F&4034=C
1658 Carry out Procedures for all workshop operations on hybrid vehicles before starting work. Information about these procedures can be found in the instructions. false Hybrid vehicles 00
1=A&1323=E&4034=B!1=A&1323=F&4034=B!1=B&1323=E&4034=B!1=B&1323=F&4034=B
394 (no heading) false — —
1745 For vehicles with propulsion batteries. Use coolant with a freezing point of -38°C or lower. This corresponds to a minimum of 50% addition of coolant concentrate with corrosion protection in the coolant. false 0
1=A&1323=E&4034=B!1=B&1323=E&4034=B!1=A&1323=F&4034=B!1=B&1323=F&4034=B!1=A&1323=F&4034=C!1=B&1323=F&4034=C
1691 For vehicles with LNG fuel: Use coolant with a freezing point of -38°C or lower. This corresponds to a minimum of 50% addition of coolant concentrate with corrosion protection in the coolant. false 0
1=A&1323=E&5841=B!1=A&1323=F&5841=B!1=B&1323=E&5841=B!1=B&1323=F&5841=B
92 Check the fluid level. true Cooling system 02
1=A&1323=E&520=A!1=A&1323=F&520=A!1=A&1323=E&520=B!1=A&1323=F&520=B!1=A&1323=E&520=C!1=A&1323=F&520=C!1=B&1323=F&520=A!1=B&1323=F&520=B!1=B&1323=F&520=C
223 Open the valve between the double fuel tanks. false Fuel system 03
1=A&1323=E&520=A&2154=C!1=A&1323=F&520=A&2154=C!1=A&1323=E&520=B&2154=C!1=A&1323=F&520=B&2154=C
2 Check the tyre pressure. false Tyres 09
1=A&1323=E!1=A&1323=F!1=B&1323=F
1249 Check that the tailpipe has been fitted. false Vertical exhaust system 03
1=A&1323=F&392=C
1746 Lubricate. false Fifth wheel 19
1=A&1323=F&39=A
47 Activate and calibrate the system. false Digital tachograph 17
1=A&1323=E&2303=E!1=A&1323=F&2303=E!1=A&1323=E&2303=F!1=A&1323=F&2303=F!1=A&1323=E&2303=G!1=A&1323=F&2303=G!1=A&1323=E&2303=J!1=A&1323=F&2303=J!1=A&1323=E&2303=K!1=A&1323=F&2303=K!1=A&1323=E&2303=L!1=A&1323=F&2303=L!1=A&1323=E&2303=R!1=A&1323=F&2303=R!1=A&1323=E&2303=S!1=A&1323=F&2303=S!1=A&1323=E&2303=ES!1=A&1323=F&2303=ES!1=A&1323=E&2303=FS!1=A&1323=F&2303=FS!1=A&1323=E&2303=GS!1=A&1323=F&2303=GS!1=A&1323=E&2303=TS!1=A&1323=F&2303=TS!1=A&1323=E&2303=US!1=A&1323=F&2303=US!1=A&1323=E&2303=VS!1=A&1323=F&2303=VS!1=A&1323=E&2303=YS!1=A&1323=F&2303=YS!1=A&1323=E&2303=W!1=A&1323=F&2303=W!1=B&1323=F&2303=E!1=B&1323=F&2303=F!1=B&1323=F&2303=G!1=B&1323=F&2303=J!1=B&1323=F&2303=K!1=B&1323=F&2303=L!1=B&1323=F&2303=R!1=B&1323=F&2303=S!1=B&1323=F&2303=ES!1=B&1323=F&2303=FS!1=B&1323=F&2303=GS!1=B&1323=F&2303=TS!1=B&1323=F&2303=US!1=B&1323=F&2303=VS!1=B&1323=F&2303=YS!1=B&1323=F&2303=W
48 Press the Start button twice to start the computer for the first time. false Scania Interactor 19
1=A&1323=E&3212=A!1=A&1323=E&3212=D!1=A&1323=E&3212=E!1=A&1323=E&3212=F!1=A&1323=E&3212=G!1=A&1323=E&3212=H!1=A&1323=E&3212=J!1=A&1323=E&3212=K!1=A&1323=E&3212=L!1=A&1323=E&3212=M
168 Send operational data from vehicle using the diagnostic tool. If there is no working Internet connection, save any retrieved operational data on your computer. The operational data can then be sent to the factory at a later date. false Operational data 16
1=A&1323=E!1=A&1323=F!1=B&1323=F
211 Set the distance driven for the next maintenance event. Activate the reminder about the next maintenance event. false Maintenance indicator 16
1=A&1323=E&3646=A!1=A&1323=F&3646=A!1=B&1323=F
1447 Check and run software update packages (Diagnostic tool: Product update > Bundled). false Software 16
1=A&1323=E!1=A&1323=F!1=B&1323=F
1466 Check for damage. Carry out a check of their adjustability and heating function. false Mirrors 18
1=A&1323=E!1=A&1323=F!1=B&1323=F
284 Fit and adjust the transport-mounted roof air deflector. false Cab 18
1=A&1323=E!1=A&1323=F&5125=A!1=A&1323=F&5125=B
49 Remove transport protection in the cab. Check that paintwork and upholstery are in perfect condition. Fit the towing pin. Fit or fold up one or more radio antennas. Fit loose parts supplied in the cab, e.g. front view mirrors. false Miscellaneous 18
1=A&1323=E!1=A&1323=F
115 Carry out a functional check. false Front air suspension 12
1=A&1323=E&2973=A!1=A&1323=F&2973=A
116 Carry out a functional check. false Air suspension, rear 12
1=A&1323=E&2974=A!1=A&1323=F&2974=A
51 Check that all necessary documentation is provided with the vehicle. Make a note in the Driver's Manual that pre-delivery inspection has been carried out (the time for this is not included). false Documentation 00
1=A&1323=E!1=A&1323=F
88 Top up washer fluid. false Washer fluid 00
1=A&1323=E!1=A&1323=F!1=B&1323=E!1=B&1323=F
1655 Carry out Procedures for all workshop operations on electric vehicles after the work has been completed. Information about these procedures can be found in the instructions. false Electric vehicle 00
1=A&1323=F&4034=C!1=B&1323=F&4034=C
1657 Carry out Procedures for all workshop operations on hybrid vehicles after the work has been completed. Information about these procedures can be found in the instructions. false Hybrid vehicles 00
1=A&1323=E&4034=B!1=A&1323=F&4034=B!1=B&1323=E&4034=B!1=B&1323=F&4034=B
1095 Short test drive false 0 —
43 Clutch, gearbox, brakes (functional checks of service, parking, auxiliary and exhaust brakes), instrument and indicator lamps, steering, windscreen wipers/washers and headlamp washers. false Check the following functions 00
1=A&1323=E!1=A&1323=F
Change history (sv-SE) 
2025-08-21: Lagt tillbaka punkten om att kontrollera kylvÀtskenivÄn för ICE. [bib]
2024-04-08: Lagt tillbaka punkten om mjukvaruuppdatering. [bib]
2024-03-22: Tagit bort punkten “Mjukvaror: Kontrollera och kör mjukvaruuppdateringspaket (Diagnosverktyg: Produktuppdatering > Paketerad).<sws><productUpdateReadOut><header><text>Kontrollera och kör mjukvaruuppdateringspaket.</text></header></productUpdateReadOut></sws>”. [bib]
2023-12-20: Smörjning behÄlls i protokollet, kontroll av glapp och funktion har tagits bort vid Lilla D. [bib]
2023-10-06: Fler punkter, nu om slÀpfordonskoppling och ACL-behÄllare, borttagna i och med att produktion sÀkrar fler punkter och vi minskar jobbet inför leverans hos distrubutören. Se Planner-Àrende. [bib]
2023-08-28: Punkter borttagna i och med att produktion sÀkrar fler punkter och vi minskar jobbet inför leverans hos distrubutören. Se Planner-Àrende. [bib]
2022-03-23: Lagt till kontroll av speglar, frÀmst inriktade pÄ utvÀndiga. [bib]
2020-01-27: Lagt till om kontroll av CNG/LNG-etiketten. [bib]
2019-10-11: Lagt till kontroll av kylvÀtskenivÄn efter beslut av QM-mötet pga. luft i kylsystemet efter fyllningen i produktionen. [bib]
2019-10-07: Ändrat titel frĂ„n Liten leveranskontroll (D). [bib]
2019-09-05: Lagt till admonitions för stopp-start, rutiner vid arbete med hybrid och stÀnga av gastillförseln.
2019-05-31: Har tagit bort kontrolldragning av hjulmuttrar enligt jira WSM-20991. [bib].
2019-01-18: Lagt in nya punkten om att kontrollera och uppdatera mjukvaror. [bib]
2018-10-04: Lagt till ny punkt som bestÄr av "kontroll av vÀtskenivÄ" och "kontroll av status", Àr ihopslagna med anledning av SWS. [bib]
2018-03-19: Lagt till kontroll av att Àndröret Àr ditsatt. [bib]
2017-10-19: Lagt till smörjning (chassi, hytt, vÀndskiva och dragkrok) Àven fyll pÄ ACL-behÄllaren och att det kommer ut rent fett. [bib]
2017-03-24: Tagit bort villkor 39=A sÄ att Àven lastbilar som inte Àr pÄbyggda fÄr tillgÄng till protokollet. [bib] 
2016-07-14: Lagt till villkor 39=A för att protokollet endast ska visas för dragbilar. [bib]
2016-07-12: Generationsbeteckning dÀr protokollpunkterna börjar. I och med att vi har gemensamma protokoll för PGRT och PGRS (NCG) behöver vi ange bÄda under protokollhuvudet. [bib]
2016-07-01: Lagt till funktionskontroll för luftfjÀdring fram resp. bak. [bib]
2015-10-13: Uppdaterat villkorssÀttningen för NCG. [bib]
2014-12-22: Tagit bort punkten "GÀller för fordon utan batterifrÄnskiljare. SÀtt dit nedanstÄende sÀkringar om fordonet Àr specificerat med motsvarande utrustning: 34, 37 och 43. [bib]
2014-05-26: Tagit bort punkten "Öppna TRV-ventilen genom att vrida vredet till stopp-positionen." Justerat varianttexten och lagt till punkter om dokumentation, kontrollera olja, spolarvĂ€tska, utvĂ€ndig belysning och kort provkörning. [bib]
2013-07-02: Lagt till om mjukvaru-uppdatering. [bib]
2013-07-01: Lagt till om TRV-ventilen. [bib]
2012-02-22: Ändrat flödesorningen sĂ„ att tillsynsindikatorn stĂ€lls in efter man raderat felkoder. (dbn)
2011-11-10: Lagt till utlÀsning av driftdata. (dbn)
2011-11-03: Uppdaterat enligt FM utgÄva 4. [sssbib]  
101202 Tagit bort punkten kontrollera toe-in. (ssspak)
Multi 0905 kom Liten D-tillsyn till (090206).
workshop