S Scania Multi 📌 unpin — ▢ ×
Pinned chassis: 4337764 P93MK6X4R 28034Z 942649 Unpin
Home Vehicle Parts Information Workshop Diagnostics Search Back Forward Help
V
Workshop manuals › P, G, R and T series 24 activities 21 ✱ variants

Document

ID
20
Business key
MBTL
Type
21
Variant filter
Actions specified in the standard maintenance form must be added.
1=A&1323=E&3784=B&3785=AA

Activities 24

ID Heading Component MG Filter
344 Check for gas leakage before running-in in the workshop false Fuel system 03
1=A&1323=E&520=C!1=A&1323=F&520=C!1=B&1323=E&520=C!1=B&1323=F&520=C
419 Check that the vehicle is not leaking fuel before running-in in the workshop. false Fuel system 03
1=A&1323=E&520=B!1=A&1323=F&520=B!1=B&1323=F&520=B
1660 Make sure that the starter key/starter button is in drive mode and that the function is deactivated via the switch for idle stop and start. false Idle stop and start function 16
1=A&1323=E&5526=A!1=A&1323=F&5526=A!1=B&1323=E&5526=A!1=B&1323=F&5526=A
1658 Carry out Procedures for all workshop operations on hybrid vehicles before starting work. Information about these procedures can be found in the instructions. false Hybrid vehicles 00
1=A&1323=E&4034=B!1=A&1323=F&4034=B!1=B&1323=E&4034=B!1=B&1323=F&4034=B
407 Addition false — —
445 Form for large pre-delivery inspection (D) false — —
304 Lubricate the moving parts of the tipper and hydraulic system. false Lubrication 19
1=A&1323=E&3784=B&3785=A!1=A&1323=E&3784=B&3785=B!1=A&1323=E&3784=B&3785=C!1=A&1323=E&3784=B&3785=D!1=A&1323=E&3784=B&3785=AA
300 Check the oil level. Check for leaks. false Hydraulic system 19
1=A&1323=E&3784=B&3785=A!1=A&1323=E&3784=B&3785=B!1=A&1323=E&3784=B&3785=C!1=A&1323=E&3784=B&3785=D!1=A&1323=E&3784=B&3785=AA
430 (no heading) false 0 —
407 Addition false — —
441 6 month intervals false — —
322 Change the oil. Check for leakage. false Hydraulic system 19
1=A&1323=E&3784=B&3785=AA!1=A&1323=F&3784=B&3785=AA
308 Renew the oil filter. Check for leakage. false Hydraulic system 19
1=A&1323=E&3784=B&3785=A!1=A&1323=E&3784=B&3785=B!1=A&1323=E&3784=B&3785=C!1=A&1323=E&3784=B&3785=D!1=A&1323=E&3784=B&3785=AA
324 Renew the air filter. false Hydraulic system 19
1=A&1323=E&3784=B&3785=AA!1=A&1323=F&3784=B&3785=AA
302 Clean the inside of the tank. false Hydraulic system 19
1=A&1323=E&3784=B&3785=A!1=A&1323=E&3784=B&3785=B!1=A&1323=E&3784=B&3785=C!1=A&1323=E&3784=B&3785=D!1=A&1323=E&3784=B&3785=AA
430 (no heading) false 0 —
407 Addition false — —
446 R, X, S, M, L maintenance false 0 —
332 Lubricate the moving parts of the tipper and hydraulic system. false Lubrication 19
1=A&1323=E&3784=B&3785=AA
306 Carry out a visual inspection of the condition of the bodywork and hydraulic system. false Wear and damage 19
1=A&1323=E&3784=B&3785=A!1=A&1323=E&3784=B&3785=B!1=A&1323=E&3784=B&3785=C!1=A&1323=E&3784=B&3785=D!1=A&1323=E&3784=B&3785=AA
335 Clean the tipping cylinder. false Tilt cylinder 19
1=A&1323=E&3784=B&3785=AA
337 Tighten the mountings next to the hydraulic oil tank and bodywork. false Fastener 19
1=A&1323=E&3784=B&3785=AA
338 Check the hydraulic system for leaks. false Damage and leaks 19
1=A&1323=E&3784=B&3785=AA
1657 Carry out Procedures for all workshop operations on hybrid vehicles after the work has been completed. Information about these procedures can be found in the instructions. false Hybrid vehicles 00
1=A&1323=E&4034=B!1=A&1323=F&4034=B!1=B&1323=E&4034=B!1=B&1323=F&4034=B
Change history (sv-SE) 
2019-09-05: Lagt till admonitions för stopp-start, rutiner vid arbete med hybrid och stänga av gastillförseln.
2015-12-15: Ändrat tillsyn till underhåll i varianttexten. [bib]
2011-11-02: Uppdaterat enligt FM utgåva 3, tagit bort luftfilterbyte. [bib]
2009-06-29: Nytt protokoll. [konesj]
workshop