F, K and N-series · Workshop manual

Workshop manuals › F, K and N-series 77 activities 73 ✱ variants

Document

ID: 30
Business key: RICB
Type: 73

Variant filter

1=B&1323=E

Activities 77

ID	Heading	Component	MG	Filter
373	Retrieve the vehicle false	—		—
468	Carry out a functional check. false	Instruments and indicator lamps	16	1=B&1323=E
430	(no heading) false	0		—
374	Short test drive 1 false	—		—
394	(no heading) false	—		—
600	Carry out a functional check. false	Clutch and gearbox	04	1=B&1323=E
601	Check the function of the service brake, parking brake, exhaust brake, bus stop brake and retarder. false	Brakes	10	1=B&1323=E
481	Carry out a functional check. false	Air suspension	12	1=B&1323=E&2974=A!1=B&1323=F&2974=A!1=B&1323=E&2973=A!1=B&1323=F&2973=A
430	(no heading) false	0		—
479	Check that the vehicle is not leaking fuel before running-in in the workshop. false	Fuel system	03	1=B&1323=E&520=B
344	Check for gas leakage before running-in in the workshop false	Fuel system	03	1=A&1323=E&520=C!1=A&1323=F&520=C!1=B&1323=E&520=C!1=B&1323=F&520=C
1660	Make sure that the starter key/starter button is in drive mode and that the function is deactivated via the switch for idle stop and start. false	Idle stop and start function	16	1=A&1323=E&5526=A!1=A&1323=F&5526=A!1=B&1323=E&5526=A!1=B&1323=F&5526=A
1658	Carry out Procedures for all workshop operations on hybrid vehicles before starting work. Information about these procedures can be found in the instructions. false	Hybrid vehicles	00	1=A&1323=E&4034=B!1=A&1323=F&4034=B!1=B&1323=E&4034=B!1=B&1323=F&4034=B
1284	Under the vehicle false	0		—
394	(no heading) false	—		—
946	Check that the BBMQA has been carried out. false	BBMQA inspection	00	1=B&1323=E!1=B&1323=F&8674=A
971	Check for oil, coolant, fuel, air and exhaust leakage. Carry out the checks that are applicable depending on the vehicle specification. false	Leakage	00	1=A&1323=E!1=A&1323=F!1=B&1323=E!1=B&1323=F
485	Check screw joints false	Propeller shaft	06	1=B&1323=E
488	Drain condensed water. Check that compressed air tanks are free from corrosion and external damage. false	Compressed air tanks	10	1=B&1323=E
501	Check for leaks from the gearbox and for rust on the oil filter. Renew the oil filter if there are any signs of rust. Check the oil level. Note: Always top up oil to the edge of the level hole. false	Manual gearbox	05	1=B&1323=E&37=A!1=B&1323=E&37=B!1=B&1323=E&37=C!1=B&1323=E&37=D!1=B&1323=E&37=F
505	Check the oil level. Check for leaks. false	Automatic gearbox	05	1=B&1323=E&429=C&37=E!1=B&1323=E&429=D&37=E
1099	Check the oil level. Check for leaks. false	Automatic gearbox, Allison	05	1=B&1323=E&4550=D
940	Check the oil level. Check for leaks. false	Rear central gears with hub reduction gears	08	1=B&1323=E&21=CE!1=B&1323=F&21=CE
960	Check the oil level. Check for leaks. false	Central gear	08	1=B&1323=E&21=AR!1=B&1323=F&21=AR
508	Check the oil level. Check for leaks. false	Central gear	08	1=B&1323=E&21=AK!1=B&1323=F&21=AK!1=B&1323=E&21=AL!1=B&1323=F&21=AL!1=B&1323=E&21=LA!1=B&1323=F&21=LA!1=B&1323=E&21=LE!1=B&1323=F&21=LE
518	Lubricate the chassis. When carrying out automatic chassis lubrication, check the grease level in the ACL reservoir. Top up the ACL reservoir if necessary. Ensure that lubrication is working when clean grease comes out of all of the bearings. false	Lubrication	00	1=B&1323=E
430	(no heading) false	0		—
1543	In the engine compartment false	0		—
394	(no heading) false	—		—
534	Check the oil level. Check for leakage. Fill with oil if necessary. false	Engine	01	1=B&1323=E
606	Check that cables to the starter motor and alternator are correctly routed so they cannot be damaged by adjacent components. false	Electrical systems	16	1=B&1323=E
545	Check the drive belt or drive belts, the belt tensioner and idler rollers. false	Cooling system	02	1=B&1323=E
1691	For vehicles with LNG fuel: Use coolant with a freezing point of -38°C or lower. This corresponds to a minimum of 50% addition of coolant concentrate with corrosion protection in the coolant. false	0		1=A&1323=E&5841=B!1=A&1323=F&5841=B!1=B&1323=E&5841=B!1=B&1323=F&5841=B
547	Check the fluid level. Check the freezing point of the fluid: @ °C. Adjust if necessary. false	Cooling system	02	1=B&1323=E
430	(no heading) false	0		—
1555	At the front, sides and engine false	0		—
394	(no heading) false	—		—
1647	Check that the label for fuel is in place. If the label is missing, apply a new one. false	Fuel system	03	1=A&1323=E&520=A!1=A&1323=F&520=A!1=A&1323=E&520=B!1=A&1323=F&520=B!1=A&1323=E&520=C!1=A&1323=F&520=C!1=B&1323=E&520=A!1=B&1323=F&520=A!1=B&1323=E&520=B!1=B&1323=F&520=B!1=B&1323=E&520=C!1=B&1323=F&520=C
558	Check that the label specifying the fuel requirements is clearly visible. false	Fuel tank	03	1=B&1323=E&2409=A&2471=AC&520=A!1=B&1323=E&2409=A&2471=B&520=A!1=B&1323=E&2409=A&2471=D&520=A!1=B&1323=E&2409=A&2471=H&520=A!1=B&1323=E&2409=A&2471=J&520=A!1=B&1323=E&2409=A&2471=Q&520=A
899	Check the tyre pressure. false	Tyres	09	1=B&1323=E
559	Check-tighten. false	Wheel nuts	09	1=B&1323=E
88	Top up washer fluid. false	Washer fluid	00	1=A&1323=E!1=A&1323=F!1=B&1323=E!1=B&1323=F
588	Check the fluid level. No longer included for maintenance-free batteries. false	Batteries, 24 V	16	1=B&1323=E
1030	Check the status of the batteries. false	Batteries, 24 V	16	1=B&1323=E
562	Check that the batteries are attached securely. Check that there is no damage to the connections and cables. false	Batteries, 24 V	16	1=B&1323=E
1085	Check the function and wear. Lubricate the mechanism. false	Trailer coupling	19	1=B&1323=E&1529=C!1=B&1323=F&1529=C
563	Carry out the maintenance items specified in the form from the respective bus bodybuilder. false	Form for maintenance of body	18	1=B&1323=E!1=B&1323=F
430	(no heading) false	0		—
1556	In the interior of the vehicle false	0		—
394	(no heading) false	—		—
565	Check for tightness with diagnostic tool. false	Brakes	10	1=B&1323=E
566	Calibrate the ESP steering angle sensor with diagnostic tool. false	Brake system	10	1=B&1323=E
568	Check the straight ahead position and that the plastic sleeve has been removed from the head of the set screw. false	Steering	13	1=B&1323=E
1657	Carry out Procedures for all workshop operations on hybrid vehicles after the work has been completed. Information about these procedures can be found in the instructions. false	Hybrid vehicles	00	1=A&1323=E&4034=B!1=A&1323=F&4034=B!1=B&1323=E&4034=B!1=B&1323=F&4034=B
430	(no heading) false	0		—
1095	Short test drive false	0		—
453	Before test drive false	—		—
571	Carry out a functional check. false	Steering/starter lock	00	1=B&1323=E
572	Carry out a functional check of raised idling speed. false	Engine	01	1=B&1323=E
573	Carry out a functional check. false	Bus stop brake	10	1=B&1323=E
574	Carry out a functional check. false	Hill hold	10	1=B&1323=E
575	Carry out a functional check. false	Parking brake indicator	10	1=B&1323=E
576	Carry out a functional check. false	Warning that parking brake is not applied	10	1=B&1323=E
577	Carry out a functional check. false	Kneeling	12	1=B&1323=E!1=B&1323=F
430	(no heading) false	0		—
391	Short test drive 2 false	0		—
599	Carry out a functional check. false	Steering	13	1=B&1323=E
476	Carry out a functional check. false	Clutch and gearbox	04	1=B&1323=E
477	Check the function of the service brake, parking brake, exhaust brake, bus stop brake and retarder. false	Brakes	10	1=B&1323=E
430	(no heading) false	0		—
392	After test drive false	—		—
394	(no heading) false	—		—
580	Activate and calibrate the system. false	Digital tachograph	17	1=B&1323=E&2303=E!1=B&1323=E&2303=G!1=B&1323=E&2303=J!1=B&1323=E&2303=K!1=B&1323=E&2303=L!1=B&1323=E&2303=R!1=B&1323=E&2303=S!1=B&1323=E&2303=US!1=B&1323=E&2303=VS!1=B&1323=E&2303=YS!1=B&1323=E&2303=W
578	Send operational data from vehicle using the diagnostic tool. If there is no working Internet connection, save any retrieved operational data on your computer. The operational data can then be sent to the factory at a later date. false	Operational data	16	1=B&1323=E
474	Read any fault codes. Delete the fault codes. false	Control units	16	1=B&1323=E
1460	Check and run software update packages (Diagnostic tool: Product update > Bundled). false	Software	16	1=B&1323=E
579	Set the distance driven for the next maintenance event. Activate the reminder about the next maintenance event. false	Maintenance indicator	16	1=B&1323=E

Change history (sv-SE)

2024-09-11: Tagit bort admonition om kylvätskekoncentration för framdrivningsbatterier i och med att berörd punkt inte finns. [bib]
2024-04-08: Lagt tillbaka punkten om mjukvaruuppdatering. [bib]
2024-03-22: Tagit bort punkten “Mjukvaror: Kontrollera och kör mjukvaruuppdateringspaket (Diagnosverktyg: Produktuppdatering > Paketerad).<sws><productUpdateReadOut><header><text>Kontrollera och kör mjukvaruuppdateringspaket.</text></header></productUpdateReadOut></sws>”. [bib]
2023-12-07: Ny admonition om kylvätskekoncentrationen för fordon med framdrivningsbatterier. [bib]
2023-10-06: Lagt till admonition med info om kylvätskemix för LNG-fordon. [bib]
2022-07-14: Tagit bort om punkt som tillhörde Underhåll plus om att "programmera maxhastigheten". [bib]
2021-12-08 Lagt till punkten "Fyll på spolarvätska".[htokaw]
2021-01-28: Justerat placering av åtgärder efter avslutat arbete hybrid. [bib]
2020-10-06 Tagit bort rubriker "Vid underhållsplatsen. [HTOKAW]
2020-01-23: Lagt till kontroll av CNG/LNG-etiketten. [bib]
2019-09-05: Lagt till admonitions för stopp-start, rutiner vid arbete med hybrid och stänga av gastillförseln.
2019-01-18: Lagt in nya punkten om att kontrollera och uppdatera mjukvaror. [bib]
2018-01-17: Lagt till smörjning av draganordningen, smörjning av chassit fanns redan med. Säkertställt att chassismörjning finns med pga. problem ute på fältet orsakat av otillräcklig smörjning i produktionen. [bib]
2014-06-24: Lagt till sep. punkt för kontr. av oljenivå för Allison GA868. [bib]
2013-07-02: Lagt till om mjukvaru-uppdatering. [bib]
2013-06-26: Lagt till separat punkt för kontroll av drivremmar för DC07.
2013-04-04: Tagit bort kontroll av hjulinställning på samtliga axlar. Lagt in progr. maxhastigheten till 85 km/h vid Tillsyn+. [bib]
2012-08-20: Lagt till kontroll av oljenivå på ZF-axel. (dbn)
2012-06-18: Kontroll om att BBMQA är utförd är tillbaka. [bib]
2012-05-01: Lagt till punkt om kontroll av rost på axelväxelfilter för RP835. (dbn) 
2012-02-22: Ändrat flödet och lagt aktivering av tachon tidigare. (dbn)
2012-02-16: Lagt till kontroll av däcktryck. (dbn)
2011-11-10 första utgåvan - KONSTK