Workshop manuals ›
F, K and N-series
Document
- ID
- 40
- Business key
- ETEE
- Type
- 71
Variant filter
Actions specified in the standard maintenance form must be added.
1=B&1323=E&520=B
Activities 13
| ID | Heading | Component | MG | Filter |
|---|---|---|---|---|
| 435 | Ethanol maintenance 2 (E2) includes E1 false | 0 | — | |
| 436 | 40,000 km intervals false | — | — | |
| 479 | Check that the vehicle is not leaking fuel before running-in in the workshop. false | Fuel system | 03 |
1=B&1323=E&520=B
|
| 480 | Clean the engine before working on the fuel system. false | Engine | 01 |
1=B&1323=E&520=B
|
| 635 | Open the bleed nipple on the fuel manifold and renew the fuel filter. false | Fuel system | 03 |
1=B&1323=E&520=B
|
| 530 | Recondition or renew the unit injectors. Note: Be careful when cleaning the contact surface of the copper washer on the cylinder head. There are two different versions. Option 1: Use a new flange screw with a hexagon head and tightening torque 20 Nm+75°. Option 2: Use a new Torx screw and tightening torque 20 Nm+90°. false | Fuel system | 03 |
1=B&1323=E&520=B
|
| 543 | Check and adjust valve clearance and unit injectors. Intake valve: 0.45 mm and exhaust valve: 0.70 mm. false | Engine | 01 |
1=B&1323=E&520=B
|
| 1693 | Perform maintenance of the centrifugal oil cleaner. false | Engine | 01 |
1=A&1323=E&520=B!1=A&1323=F&520=B!1=B&1323=E&520=B!1=B&1323=F&520=B
|
| 637 | Change the oil and renew the filter. Check for leakage. false | Engine | 01 |
1=B&1323=E&520=B
|
| 638 | Bleed the fuel system, start the engine and check for leaks. false | Fuel system | 03 |
1=B&1323=E&520=B
|
| 602 | Measure the supply pressure and check the overflow valve. The pressure should be 4.5-5.5 bar. false | Fuel system | 03 |
1=B&1323=E&520=B
|
| 860 | Visually check that there is nothing leaking from fuel pipes and water hoses in the auxiliary heater area. Pay specific attention to leaks at the fuel filter connections. Check the hoses for cracking. false | Auxiliary heaters | 18 |
1=B&1323=E
|
| 853 | Check the function of the auxiliary heater and test run it for 15 minutes. Note: If there are leaks, the heater must not be started because there is a serious risk of fire! false | Auxiliary heaters | 18 |
1=B&1323=E&1646=A!1=B&1323=F&1646=A
|
Change history (sv-SE)
2022-03-11: Protokollets tidigare titel var "E2-underhåll av etanolmotor, DC9E 02". [bib] 2021-08-24: Uppdatering av de tidigare punkterna om rengöring/byte av rotor till underhåll av centrifug och FPC-villkor. [bib] 2017-03-24: Omtag .... 2015-12-15: Ändrat tillsynsprotokoll till underhållsprotokoll. [bib] 2013-10-01: Delat upp E1 och E2 på separata protokoll. [bib] 2012-07-05: Ändrat till E1 och E2 [pak] 2012-03-05: Lagt till kontroll av extravärmare. (dbn) 2011-12-09: Protokoll inlagt för buss. [bib]