Workshop manuals ›
L, P, G, R and S series
Document
- ID
- 65
- Business key
- B
- Type
- 71
Variant filter
Actions specified in the standard maintenance form must be added.
1=A&1323=F&520=B
Activities 12
| ID | Heading | Component | MG | Filter |
|---|---|---|---|---|
| 435 | Ethanol maintenance 2 (E2) includes E1 false | 0 | — | |
| 1233 | For information about intervals using Scania BEO-2 engine oil, refer to preface 00:17-30 false | 0 | — | |
| 419 | Check that the vehicle is not leaking fuel before running-in in the workshop. false | Fuel system | 03 |
1=A&1323=E&520=B!1=A&1323=F&520=B!1=B&1323=F&520=B
|
| 278 | Clean the engine before working on the fuel system. false | Engine | 01 |
1=A&1323=E&520=B!1=A&1323=F&520=B
|
| 1234 | Renew the unit injectors. Renew the pressure pipes once you have renewed the unit injectors 5 times. Mark the pressure pipes as instructed. false | Fuel system | 03 |
1=A&1323=F&520=B!1=B&1323=F&520=B
|
| 1251 | Check and adjust valve clearance. Intake valve: 0.45 mm and exhaust valve: 0.70 mm. false | Ethanol engine | 01 |
1=A&1323=F&520=B!1=B&1323=F&520=B
|
| 1238 | Drain the oil. false | Engine | 01 |
1=A&1323=F&520=B!1=B&1323=F&520=B
|
| 1693 | Perform maintenance of the centrifugal oil cleaner. false | Engine | 01 |
1=A&1323=E&520=B!1=A&1323=F&520=B!1=B&1323=E&520=B!1=B&1323=F&520=B
|
| 1239 | Renew the oil filter. Check for leakage. false | Engine | 01 |
1=A&1323=F&520=B!1=B&1323=F&520=B
|
| 1262 | Fill with oil and check the label. false | Engine | 01 |
1=A&1323=F&520=B!1=B&1323=F&520=B
|
| 1242 | Renew the fuel filter. false | Fuel system | 03 |
1=A&1323=F&520=B!1=B&1323=F&520=B
|
| 1282 | Bleed the fuel system. false | Fuel system | 03 |
1=A&1323=F&520=B!1=B&1323=F&520=B
|
Change history (sv-SE)
2021-08-23: Uppdatering av de tidigare punkterna om rengöring/byte av rotor till underhÄll av centrifug och FPC-villkor. [bib] 2018-10-05: Lagt till "Avlufta brÀnslesystemet" som en separat punkt. [bib] 2018-09-25: Lagt till ny punkt som bestÄr av att "fyll pÄ olja" och kontrollera att etiketten ... finns pÄ plats" Àr ihopslagna med anledning av SWS. [bib] 2018-08-27. Tagit bort punkten "Starta motor och kontrollera lÀckage" i och med att den ingÄr i anvisningen. [bib] 2018-07-06: Protokollet kommer tÀcka in bÄde DC13 157 och den DC09 som kommer senare. [bib] 2017-12-20: Nytt protokoll. [bib]