Accelerator pedal sensor, PWM signal low
â–¶ How to fix
Reset the control unit using SDP3 or Allison diagnostic tool and check whether the control unit locks onto a correct source.Check the cable harness from the accelerator pedal sensor to control unit pins 12, 44 and 58.If no fault is found, contact an Allison dealer.
What you'll see
No driver-visible symptom recorded.
System reaction
No system-reaction text recorded.
Diagnostic depth
Detection
The control unit has detected that the PWM signal from the accelerator pedal sensor has been less than 4.9 %.
Possible cause
Incorrect source for accelerator pedal position information may be selected by control unit. Damage to the cable harness can also generate this fault code.