S Scania Multi 📌 unpin — ▢ ×
Pin a chassis:
Home Vehicle Parts Information Workshop Diagnostics Search Back Forward Help
V
DTC › ACS5 ACS5 / 001E

Propvalve right Shortcircuit (PROP_VALVE_NODE_1_SC)

â–¶ How to fix

Check connectors, cable harnesses and valve.

What you'll see

No driver-visible symptom recorded.

System reaction

If the failure occurs during driving, the ACS malfunction warning will be active and the system will enter limp home mode. The damping to the left valve will be doubled when this error occurs to compensate for the lost damping in the right valve.

Diagnostic depth

Detection

The DTC becomes active if the current flowing through the valve has been to high for 0,5s The DTC becomes inactive if the current flowing through the valve has been at normal level for 0,5s this test is only performed once every 20s The DTC is only being Activated/Deactivated if the Vehicle speed is above 20km/h and one of the conditions above are fulfilled. Or deactivated if an Open circuit is detected in the valve circuit. The DTC also becomes active if a short circuit is detected while reversing against articulation end positions.

Possible cause

Faulty connector, cable harness or broken valve.

{ } Raw XML
diag