ECU:s manufacturer area is invalid. ECU supplier added incorrect values or fault in flash memory
â–¶ How to fix
Clear the DTC memory and switch off/on the power with the starter key (U15). Run the engine for approx 10 minutes. Check if the DTC has been generated again. If the DTC has been regenerated or if the engine fails to start, replace the EEC control unit, E67
What you'll see
No driver-visible symptom recorded.
System reaction
No system-reaction text recorded.
Diagnostic depth
Detection
CRC checksum for manufacturer area is incorrect
Possible cause
Pontential flash-memory failure in the EEC (E67) micro controller or incorrect manufacturer area configuration flashed during production