ID pins error
Reset KL15, Check for broken or shorted ID pins if DTC is still active. if not active, do nothing and clear the passive DTC.
What you'll see
No driver-visible symptom recorded.
System reaction
-Incase of broken jumpers, the system will remember the previous ID pin connection (A or B) and continue operation -Incase of exchange of placements, the systems will take up a new ID based on the new pinning and continue operation. The operational logs are deleted when system positions are interchanged. The DTC is to notify the above 2 things has happened.
Diagnostic depth
The control unit remembers the old ID pin configuration and Checks the configuration during every wakeup
- The jumper connected between the ID pins has broken or has bad contact to the pins. This can happen during normal operation. - Incase of two AXIs (A&B), there is a chance for interchanging the postions of AXIs in the vehicle. This will lead to change in ID pin configuration. AXI will detect the change in role from (A to B or Viceversa) and set this warning DTC.