The BCI interface air suspension controls have been active too long.
â–¶ How to fix
- Check the switch and switch module and replace it if necessary.
What you'll see
No driver-visible symptom recorded.
System reaction
The signal is ignored as long as the fault is present. The signal is no longer ignored and the DTC is set to inactive if the fault is not present for at least 1 second.
Diagnostic depth
Detection
At least one signal from BCI interface for air suspension control has been active too long and is seen as implausible.
Possible cause
- The switch is stuck in pressed position. - The switch or remote control is broken. - The remote control sends corrupt information regarding switch status.