Signal, ParkingBrakeSwitchIndication out of defined range
â–¶ How to fix
Step-1: Perform a Klemme-30 reset (Power Reset). Step-2: If the DTC is still active, check the sending ECU(s).
What you'll see
Not applicable
System reaction
The DTC will allow to work with diagnostic programming and diagnostic Reset. No applicable system reactions/possible effects.
Diagnostic depth
Detection
The DTC will set during the following condition: 1.ParkingBrakeSwitchIndication signal has value = 2-Reserved. 2.system state: NMWait, PreDrive, DriveDown, DriveUp, PostRun, Off, Error, Flash, LowVolt. 3.system voltage is above 16v. 4.system voltage is below 32v.
Possible cause
The received signal ParkingBrakeSwitchIndication value is in the error range. The received signal value is 0x02-Reserved.