Signal, HighResolTotalVehicleDistance out of defined range
Step-1: Perform a Klemme-30 reset (Power Reset). Step-2: If the DTC is still active, check the sending ECU(s).
What you'll see
Not applicable
System reaction
No applicable system reactions/possible effects.
Diagnostic depth
The DTC will set during the following condition: 1.HighResolTotalVehicleDistance signal has a value between the range, [0xFB000000, 0xFFFFFFFF]. 1.system state: NMWait, PreDrive, DriveDown, DriveUp, PostRun, Off, Error, Flash, LowVolt. 2.system voltage is above 16v. 3.system voltage is below 32v.
The received signal value is in one of the below mentioned value ranges: 0xFB000000 - 0xFBFFFFFF :: Parameter Specific 0xFC000000 - 0xFDFFFFFF :: Reserved 0xFE000000 - 0xFEFFFFFF :: Error 0xFF000000 - 0xFFFFFFFF :: SNA (Signal-Not-Available)