Pressure sensor, power supply (slave control unit)
â–¶ How to fix
Check the cable harness for damage and forbidden connections and make sure the pressure sensor is intact. When the sensor is renewed, the control system must be calibrated using SDP3.If the fault persists, perform spare parts programming and check control unit function.
What you'll see
No driver-visible symptom recorded.
System reaction
No system-reaction text recorded.
Diagnostic depth
Detection
The voltage on the input from the level sensor has been too high.
Possible cause
This fault code is generated if the pressure sensor or cable harness has been exposed to undesirable positive voltage, e.g. through a short circuit.