DTC ›
EBS8
| Code | Heading | Variants |
|---|---|---|
| 08E014 | Axle Modulator 2A / Axle Modulator Configuration Missing | — |
| 08E015 | Axle Modulator 2A / Parameter Checksum Failure | — |
| 08E016 | Axle Modulator 2A / Hardware Parameter Inplausibility | — |
| 08E017 | Axle Modulator 2A / Message Checksum Failure CAN | — |
| 08E018 | Axle Modulator 2A / Faulty Message Counter CAN | — |
| 08E019 | Axle Modulator 2A / Bus Off Error System CAN Bus | — |
| 09E002 | Axle Modulator (2B) has faulty CAN Message (Checksum) | — |
| 09E007 | Compatibility Check of Axle Modulator (2B) | — |
| 09E008 | Axle Modulator 2B / Timeout Detection CAN | — |
| 09E009 | Axle Modulator (2B) has faulty CAN Message (Timeout) | — |
| 09E00A | Axle Modulator (2B) has faulty CAN Message (Counter) | — |
| 09E00B | Axle Modulator 2B / Reserved Failurebit | — |
| 09E00C | Axle Modulator 2B / Internal Failure - Solenoid Failure | — |
| 09E00D | Failure Detection "Over Equipment" of Axle Modulator (2B) | — |
| 09E014 | Axle Modulator 2B / Axle Modulator Configuration Missing | — |
| 09E015 | Axle Modulator 2B / Parameter Checksum Failure | — |
| 09E016 | Axle Modulator 2B / Hardware Parameter Inplausibility | — |
| 09E017 | Axle Modulator 2B / Message Checksum Failure CAN | — |
| 09E018 | Axle Modulator 2B / Faulty Message Counter CAN | — |
| 09E019 | Axle Modulator 2B / Bus Off Error System CAN Bus | — |
| 0CFA01 | Implausible Pressure Control (TCV) / Pressure Too Low | — |
| 0F0708 | Message Timeout Failure SAE J1939 CAN (SAS / SAE) | — |
| 0F070C | Error Indication of SAS Signal | — |
| 0F070E | Constant Message Counter of SAS CAN Message | — |
| 0F0711 | Signal Not Available Indication of SAS Signal | — |
| 0F0713 | Invalid Checksum of SAS CAN Message | — |
| 0F071F | Invalid Status of SAS Signal | — |
| 10070C | ESC Module Failure Flag "Yawrate Sensor" | — |
| 100716 | Plausibility between Front Axle Speed and Yawrate Sensor Signal | — |
| 10E001 | Voltage Supply Axlemodulator (1A) Too Low | — |
| 10E003 | Shorted to UB Power Supply AxM 1A | — |
| 10E004 | Shorted to GND Power Supply AxM 1A | — |
| 11070C | ESC Module Failure Flag "Lateral Acceleration Sensor" | — |
| 11E001 | Voltage Supply Axlemodulator (1B) Too Low | — |
| 11E003 | Shorted to UB Power Supply AxM 1B | — |
| 11E004 | Shorted to GND Power Supply AxM 1B | — |
| 120401 | Iso 11992 CAN Interface / Can Low Error | — |
| 120409 | Iso 11992 CAN Interface / Interruption of Communication | — |
| 12040B | Iso 11992 CAN Interface / BusOff Error | — |
| 12040E | Iso 11992 CAN Interface / Can High Error | — |
| 12070C | ESC Module Failure Flag "Longitudinal Acceleration Sensor" | — |
| 12E001 | Voltage Supply Axlemodulator (2A) Too Low | — |
| 12E003 | Shorted to UB Power Supply AxM 2A / ESCM | — |
| 12E004 | Shorted to GND Power Supply AxM 2A / ESCM | — |
| 13E001 | Voltage Supply Axlemodulator (2B) Too Low | — |
| 13E003 | Shorted to UB Power Supply AxM 2B | — |
| 13E004 | Shorted to GND Power Supply AxM 2B | — |
| 14FA05 | Detection of open circuit at Brakeswitch 1 / 2 | — |
| 150404 | Detection of short to GND at Brakeswitch 1 / 2 | — |
| 16FA02 | Detection of Significant PWM Input Signal Difference | — |