DTC ›
CUV2
| Code | Heading | Variants |
|---|---|---|
| 0241 | Overload on rear fog light output | — |
| 0247 | Fault on main power supply | — |
| 0248 | Overload on work light output | — |
| 0249 | Overload on 61 relay i.e power relay | — |
| 024A | Open load on 61 relay i.e power relay | — |
| 024B | Absence of Auxilliary CAN bus communication (CAN2 buffer overflow) | — |
| 024C | Total output current through ECU too high | — |
| 024D | The worklight switch signal from the auxiliary light switch module is faulty. | — |
| 024E | Open load on headlamp levelling supply output | — |
| 024F | The headlamp levelling switch signal from the main light switch module is missing or faulty. | — |
| 0250 | The fog light front switch signal from CPEL is faulty. | — |
| 0251 | The fog light rear switch signal from CPEL is faulty. | — |
| 0252 | The distance light upper switch signal is faulty. | — |
| 0253 | The distance light lower switch signal is faulty. | — |
| 0254 | CPEL node: timeout in CAN communication | — |
| 0255 | CPEL internal error | — |
| 0258 | ECU hardware OEW failure. | — |
| 0259 | ECU hardware SPI failure. | — |
| 025C | Rain/Light sensor calibration fault | — |
| 025E | Rain/Light sensor coding missing | — |
| 025F | Light sensor error | — |
| 0261 | Rain/Light sensor over voltage | — |
| 0262 | Rain/Light sensor communication error | — |
| 0263 | LIN bus status | — |
| 0264 | Timeout on the rain/light sensor. | — |
| 0287 | The main light switch may be stuck in between of valid positions. | — |
| 028A | Overload on side marker lamps left. | — |
| 028B | Overload on side marker lamps right | — |
| 028C | Overload on wiper high speed relay | — |
| B000 | — | — |
| B001 | — | — |
| B002 | — | — |
| B003 | — | — |
| B004 | — | — |
| B005 | — | — |
| B006 | — | — |
| B007 | — | — |
| B008 | — | — |
| B009 | — | — |
| B00A | — | — |
| B00B | — | — |
| B00C | — | — |
| B00D | — | — |
| B00E | — | — |
| B00F | — | — |
| B010 | — | — |
| B011 | — | — |
| B012 | — | — |
| B013 | — | — |
| B016 | — | — |