DTC ›
EMD0
| Code | Heading | Variants |
|---|---|---|
| 0234 | Boost pressure higher than reference | — |
| 0247 | Wastegate actuator SCB on high side | — |
| 0248 | Wastegate actuator not responding | — |
| 0249 | Turbocharger/Supercharger Wastegate Solenoid "B" Low | — |
| 0263 | Cylinder 1 balancing min or max. | — |
| 0266 | Cylinder 2 balancing min or max | — |
| 0269 | Cylinder 3 balancing min or max | — |
| 0272 | Cylinder 4 balancing min or max | — |
| 0275 | Cylinder 5 balancing min or max | — |
| 0278 | Cylinder 6 balancing min or max | — |
| 0281 | Cylinder 7 balancing min or max | — |
| 0284 | Cylinder 8 balancing min or max | — |
| 0298 | Engine Oil Over Temperature | — |
| 0299 | Boost pressure lower than reference | — |
| 0340 | Camshaft Position Sensor, Open Circuit. | — |
| 0341 | Camshaft Pulse Pattern, Gap or Sync Error or other fault. | — |
| 0342 | Camshaft position sensor, short circuit to ground | — |
| 0343 | Camshaft position sensor, short circuit to battery | — |
| 0400 | Egr system faulty | — |
| 0401 | EGR lower than desired | — |
| 0402 | EGR higher than desired | — |
| 0405 | EGR position sensor (EGR2POS), short circuit to ground or open load | — |
| 0406 | EGR position sensor (EGRPOS), short circuit to battery. | — |
| 0426 | Exhaust gas temperature sensor before the SCR catalyst (T113) | — |
| 042F | EGR Actuator Control Error | — |
| 0472 | Exhaust pressure sensor, short circuit to ground or open load | — |
| 0473 | Exhaust press sensor, short circuit to +24V | — |
| 0475 | Exhaust brake (V17/V107) | — |
| 0476 | Exhaust Pressure Control Valve "A" Range/Performance | — |
| 0477 | Exhaust brake (V17/V107) | — |
| 0478 | Exhaust brake (V17/V107) | — |
| 0480 | Fan actuator (fanAct), open load | — |
| 0488 | EGR actuator (egrAct), stuck close | — |
| 0489 | EGR actuator (egrAct), SCB on low side or OL or SCG on high side | — |
| 0490 | EGR actuator (egrAct), short circuit high to +24V | — |
| 049D | EGR pos sensor: Adapted sensor voltage, at open end position, is outside the permitted range. | — |
| 0512 | Starter actuator (starter), open load | — |
| 0521 | Oil press sensor (P_OIL), faulty | — |
| 0522 | Oil press sensor (P_OIL), short circuit to ground or open load | — |
| 0523 | Oil press sensor (P_OIL), short circuit to +24V | — |
| 0524 | Oil press sensor, pressure too low | — |
| 0526 | Fan/WPC speed sensor supply too low | — |
| 0528 | Fan speed sensor circuit (T123) no signal | — |
| 0562 | Battery voltage < 21 V (not below 400 rpm) for 5 s | — |
| 0563 | Battery voltage > 32 V for 5 s | — |
| 0630 | Inconsistency in configuration between EMO and OCS | — |
| 0638 | Throttle, control error | — |
| 063A | Alternator 1 - No signal or not plausible signal | — |
| 0691 | Fan actuator (fanAct), short circuit high to ground | — |
| 0692 | Fan actuator (fanAct), short circuit to +24V | — |